Hi again dunn3,
Your cndf file had transponders & channels all over the place... on wrong satellites... and all mixed up... so I have completely edited/updated your cndf file for you... because there was no reply to my last post... I have given you the same arc as my own... from 30.0°W to 60.0°E
If you cannot receive some of the satellites in the arc... simply deselect them in your menu... there are no channels downloaded in the new cndf file... and I have also had to remove all DiSEqC positions as they could also be incorrect or corrupted...
I have used NDFEdit 1.66 to make your new cndf file... and I have downloaded all up-to-date transponders (but no feed transponders) from the KingOfSat website... all you need to do now is locate all the satellites you want to use and store their positions... then simply use Auto Navigation to download all the channels from all your chosen satellites...
This will solve the problems you have been having... just make sure that the DiSEqC positions you store in the receivers'/motors' memory are definitely the correct satellite positions...
The new file has today's date/time on it as I have just tested it on my own receiver... then uploaded back to my USB flash drive... and then uploaded to here...
I hope this helps...
Best Wishes,
Zorch