- Joined
- Oct 10, 2005
- Messages
- 65
- Reaction score
- 1
Hi all,
My SCPH-39003 PS2 (Version 7) stoppped reading CD's, the usual trouble,. so like I have done many times on many units before, I cleaned the laser, blah blah blah.
Anyways I went a bit further than normal and took the entire DVD unit out, unplugging the Mobo to Laser cable and the other three down the side of the unit.
When I put the thing back together it powers up (the fan rotates, and the on off button has a bight green light) but there is no picture.
Pressing the eject button also switches the unit on, but the tray doesn't eject.
I think it's one of two things:
1.0 The mobo to laser cable looks a bit battered at the laser connecto end
2.0 I haven't aligned the tray up properly
If it's not any of the above, any ideas?
I don't want to have to replace the PS2 for reasons I am sure you can guess....
My SCPH-39003 PS2 (Version 7) stoppped reading CD's, the usual trouble,. so like I have done many times on many units before, I cleaned the laser, blah blah blah.
Anyways I went a bit further than normal and took the entire DVD unit out, unplugging the Mobo to Laser cable and the other three down the side of the unit.
When I put the thing back together it powers up (the fan rotates, and the on off button has a bight green light) but there is no picture.
Pressing the eject button also switches the unit on, but the tray doesn't eject.
I think it's one of two things:
1.0 The mobo to laser cable looks a bit battered at the laser connecto end
2.0 I haven't aligned the tray up properly
If it's not any of the above, any ideas?
I don't want to have to replace the PS2 for reasons I am sure you can guess....