Re Replay PVR-C100

icm

Inactive User
Joined
Dec 5, 2004
Messages
1,432
Reaction score
5
hello to all,

flashed my m8 replay box with

stblink5.32.zip

Replay_Box_PVR_old_OSD_913.zip

after it finished it says successful. when i rebooted it i comes up with error on the screen. can anyone advise please.


thanks.
 

icm

Inactive User
Joined
Dec 5, 2004
Messages
1,432
Reaction score
5
could someone kindly copy a working flash from there replay box pvr-c100 and upload it please. desperate for one as i have a bad flash on one and cannot get rid of it. thanks
 

dellboymark

Inactive User
Joined
Feb 12, 2006
Messages
115
Reaction score
0
The latest firmware only works if you have channel data on the box,if you don't have any chan data the box will just keep re,booting and won't successfully boot up,to get round this you need to install channel data that you have saved,if you haven't got any saved,downgrade to the 744 firmware,do a scan,save the channel data to your computer,reinstall the 913 firmware,then click on write factory data and transfer your saved channel data on to the box,once you have done this your box will then successfully boot up,if you have any problems flashing you can try downgrading to the 744 firmware then upgrading back to the 913 firmware or alternatively you can flash the firmware on the box by clicking on upgrade boot loader,this usually works,good luck,kind regards mark
 
Last edited:

icm

Inactive User
Joined
Dec 5, 2004
Messages
1,432
Reaction score
5
The latest firmware only works if you have channel data on the box,if you don't have any chan data the box will just keep re,booting and won't successfully boot up,to get round this you need to install channel data that you have saved,if you haven't got any saved,downgrade to the 744 firmware,do a scan,save the channel data to your computer,reinstall the 913 firmware,then click on write factory data and transfer your saved channel data on to the box,once you have done this your box will then successfully boot up,if you have any problems flashing you can try downgrading to the 744 firmware then upgrading back to the 913 firmware or alternatively you can flash the firmware on the box by clicking on upgrade boot loader,this usually works,good luck,kind regards mark

tried it m8 still not luck.
 

fraz7860

New Member ++
Joined
Apr 5, 2007
Messages
13
Reaction score
0
hello i used stblink 5.20, first i flashed with 742a then i upgraded with new au software
 
TEST
Top