This little tool lets you do some magic in your máquina.Te to change the MAC address FOREVER, easy, huh?
———
Procedure:
———
1 º) Make a hard drive or flash drive / external, for example, into any USB port (the application takes care of searching alone).
2 º) Now you have 2 options:
a – Do not put any files on the USB drive. In this case, the program will use a special MAC address (Air Base).
b – Now put a file called “mac.bin,” This file will be your new mac. You need to put in binary format
6 bytes of your new Mac, for example, DE 11 00 11 4A.
3 º) Install the application, and throw.
4 º) The program will make a backup of your old Mac USB drive as “mac_original.bin.”
Remember to keep the backup in a safe place before launching the program again, but will be overwritten by the current modified (mac.bin), otherwise perhaps could be lost forever ….
5 º) We hope that the program returns to the XMB or to restart the system.
If restart automatically, restart it manually from PS3, you’ll forever change your mac.
6 º) That’s it!
——
NOTES:
——
a) It is necessary to use SS patches enabled to use if you have no SS patches lv1 possibly block access to these services
b) If the program can not make a backup of your old mac, red LED flashes.
c) If the program can not change your mac, the LED will be off (if you reboot your machine back to the green LED)
d) If the program can make a backup or Mac LED flashes green.
d) If the program can change your Mac to leave the LED green off and then after a few seconds, if you can not let him off.
e) This proven and tested by the team, we are not responsible for the misuse of it to this tool.
f) Do not change the value in the RAM (lv1, lv2 vsh), the change is real.
g) can be modified in a custom firmware to official firmware update and will remain unchanged.
h) This application will be a plugin for 3.41 DH JFW