progging an atmega card

memememe

Inactive User
Joined
Oct 23, 2005
Messages
37
Likes
0
#1
Hi all :)
My first post...
I have tried for ages without help but im struggling...

I have:
Pace dI 4000 - n box
Atmega 163 card
Infinty USB prog

My box has been done in the past by somoone else and i have the IRD and Box key numbers.

I have downloaded Toxic 7 then using toxic7_ExtEEgen.exe i edited in my numbers then saved as a bin file, erased the card then programmed in using the infinity software Toxic7NTL.hex to the flash and my bin to the ext eeprom.

but it does not work, can any very kind person out there help me please.

Thanks
 

fatblerk

Inactive User
Joined
Mar 29, 2005
Messages
1,429
Likes
2
#3
memememe said:
Hi all :)
My first post...
I have tried for ages without help but im struggling...
I have:
Pace dI 4000 - n box
Atmega 163 card
Infinty USB prog
My box has been done in the past by somoone else and i have the IRD and Box key numbers.
I have downloaded Toxic 7 then using toxic7_ExtEEgen.exe i edited in my numbers then saved as a bin file, erased the card then programmed in using the infinity software Toxic7NTL.hex to the flash and my bin to the ext eeprom.
but it does not work, can any very kind person out there help me please.
Thanks
Make sure you write the exeep file 1st , then write the flash file ..... writing the exeep file always erases the flash file if written 1st ....

Also a 4000 box with a toxic7ntl?????? ... are you sure? are you on pureNTL with a 4000
 
TEST
Top