spent about 3 hours last night and this orning creating acompletly new rootfs-overlay structure, fully DW-ised, even though it didnt actually fix anything, it made customising images piss easy, and i could have (as in now cant) created a downloadable ipk for ppanel download over UR images as well
anyway........
checked everything i had done, FTP'd it to a receiver, rebooted the receiver, all was good, then decided to compile an image, with everything included before the setup wizard starts, and then create the ipk from the overlay files.
set a compile running, reset the receiver to UR ready to check that all the DW stuff is there after the wizard runs (this was so that images wouldnt be backup images when released)
compile completed, copied update to usb, fired up miniroot, and flashed, noticed DW boot screen, so far so good, then 'Loading PLi-E2-UR...' in the display??? that shouldnt be there??
wizard start, setup your Linuxbox??? that should say TM800??
install default channel list, yes, no lists available??? i setup rats channel list as default within the wizard, setup sat, defaulted to 19.2 on start, i changed that to 28.2
by now i know that something is not right, i abandon the receiver and go back to the laptop
the whole new overlay file structure i created has been overwritten with OLD UR stuff
BASTAD FUKIN ARSE CLOWN MUTHER FUKER TW@
looked into it, and a file from last april is STILL being used and calling on archives, so the overlay actually gets deleted, then unpacked from an archive, before going into the image
ive played with some stupid, backwards, makes no sense, crap, but this has now really pissed me fkin off
If they release the 500HD before the 800 is sorted, im jumping ship, and going to E1TM and the openPLi stuff for dreamboxes
the LATEST code we have access to has none of the changes added to images since around 12/12
this is like trying to swim up a fkin waterfall
anyway........
checked everything i had done, FTP'd it to a receiver, rebooted the receiver, all was good, then decided to compile an image, with everything included before the setup wizard starts, and then create the ipk from the overlay files.
set a compile running, reset the receiver to UR ready to check that all the DW stuff is there after the wizard runs (this was so that images wouldnt be backup images when released)
compile completed, copied update to usb, fired up miniroot, and flashed, noticed DW boot screen, so far so good, then 'Loading PLi-E2-UR...' in the display??? that shouldnt be there??
wizard start, setup your Linuxbox??? that should say TM800??
install default channel list, yes, no lists available??? i setup rats channel list as default within the wizard, setup sat, defaulted to 19.2 on start, i changed that to 28.2
by now i know that something is not right, i abandon the receiver and go back to the laptop
the whole new overlay file structure i created has been overwritten with OLD UR stuff
BASTAD FUKIN ARSE CLOWN MUTHER FUKER TW@
looked into it, and a file from last april is STILL being used and calling on archives, so the overlay actually gets deleted, then unpacked from an archive, before going into the image
ive played with some stupid, backwards, makes no sense, crap, but this has now really pissed me fkin off
If they release the 500HD before the 800 is sorted, im jumping ship, and going to E1TM and the openPLi stuff for dreamboxes
the LATEST code we have access to has none of the changes added to images since around 12/12
this is like trying to swim up a fkin waterfall