New Phantompatch-TM5402HD-ALL_123p_10-07-2012

[xxxxxx]

New Phantompatch-TM5402HD-ALL_123p_10-07-2012


Please test for all outstanding problems

@ Download center

 

[chopps]

I thought I felt a disturbance in the force, a few minutes ago.
Downloading now, be right back...

 

[Zorch]

Hi again all,

Phantompatch-TM5402HD-ALL_123p_10-07-2012.stb (6.4MB)

Please test for all outstanding problems

***Test results***
(I have only tested channels on 19.2°E)

TNT SD channels on 19.2°E still freezing every 7-8 seconds (a few did not clear at all)
TNT HD channels on 19.2°E working fine
C+NL on 19.2°E working fine
Canal$at on 19.2°E working fine
ORF on 19.2°E working fine
AustriaSat/Easy TV on 19.2°E working fine

Blind Search scanner is still not working properly
No additional Symbol Rate search settings in Blind Search menu (as requested)
Signal Quality bar is still only showing 5%-9% on TP's with no signal lock
No 'Sat Finder'/Spectrum Analyzer (as requested)

So it looks like none of the things I requested to be fixed/added to the new patch have actually been done... I don't know why I bothered to ask... very disappointed...

@PhantOm
Please correct me if I'm wrong here mate... but isn't this new Phantompatch yet again based on TM Original Software v1.20... which is IMHO... nowhere near as good/stable as TM Original Software v1.17... which incidentally was the basis of the last really good/stable patch for the TM 5402 HD (Phantompatch 117)

The only problem that Phantompatch 117 had...was that it didn't open C+NL... everything else (EMU wise) was excellent... is it not possible to just add C+NL to Phantompatch 117...?

I have now gone back to Phantompatch 117... and I will just use my Diablo² cam when I want to watch C+NL

@PhantOm
Thank you once again for you continued support for all of the Technomate receivers... it is much appreciated mate...

Best Wishes,
Zorch

 

[chopps]

Righty, here's a quick and dirty update.
Literally 10 minutes of testing, so not a definitive test.

TM-5402 HD v1.23

System Info page no longer crashes the receiver, so CAS and BISS menus can now be accessed here again. FIXED

Motor stopping during transit if different channel selected, NOT FIXED

Canal digitaal NL @ 19.2East irdeto2 OK
Bulsat @ 39°East Irdeto2 channels OK
Rai @13°East 10992 V 27500 Seca August OK
AustriaSat Cryptoworks @ 19.2East OK
ORF Digital + HD Cryptoworks @ 19.2East OK
Mezzo 12245 H 27500 @ 13East OK
Ant 1 europe @ 39East 11052 V 30000 OK
12111 H 27500 Sirius 4 @ 4.8°East Cryptoworks channels only OK
TV Globo Internacional @ 13East OK

TNT @ 19.2East NOT FIXED
SD Channels freezing every 6 seconds.
example : M6, TF1 SD, W9 all on 11895V
HD versions of these channels working fine.

 

[holmroad]

Please keep all your feed back for Phantom coming in guys - because presumably a lot depends on findings wity THIS patch as to what happens on the NEXT patch for the TM6000 Super series patch 748P?

It is interesting to see that at least SOME things are actually coming to fruition, e.g. C Ned 19E AT LAST -but the positional settings between satellites and TNT Sat SD on 19E not good?
Has anyone tried the 8281 or Cccam usage, partic wuith Sly Italia 13E yet please?:Hit:

 

[chopps]

C+ Ned was fixed about 3 patches ago on 5402, but it broke others on 19.2.
Apart from TNT they seem good now.

Motor has been stopping on channel change since around 1.16 approx.

I'm not clearing anything apart from UK on 8281 at present either using newcamd.
This might be my provider - can someone else check italy, germany, spain please?

Edit: Just rolled back to 1.17 and all now clearing. Someone else definitely needs to try this please.

 

[jetsetw]

I am still on 1.17p - haven't tried anything more recent due to reports of problems with later patches.

Now that 1.23p is the first to clear CNed on 19E, is there anything worth watching on this package?
Exactly which transponders/channels on CNed are clearing?

Jetset

 

[xxxxxx]

I am still on 1.17p - haven't tried anything more recent due to reports of problems with later patches.

Now that 1.23p is the first to clear CNed on 19E, is there anything worth watching on this package?
Exactly which transponders/channels on CNed are clearing?

Jetset

Irdeto2 channels only m8
CanalDigitaal
12515 H 22000 5/6 SBS 6 - Net 5
Nederland 1 - Nederland 2 - Nederland 3
National Geographic
Nickoleon Nederland / Comedy Central Nederland

CanalDigitaal
12344 H 27500 3/4
RTL 4/5/7/8 - Discovery
Animal Planet/TLC Nederland - EuroSport
Disney XD Netherlands/Veronica
KinderNet Nederland/Comedy Central Nederland
Hustler TV - Animax

 

[chopps]

Kidsco
RTL4
RTL5
RTL7
Discovery
Animal Planet
TLC
Eurosport
Disney XD
Veronica
RTL8
Kindernet
Comedy Central
Hustler
Planet
Animax
Dorcel
SBS6
NET5
NED1
NED2
NED3
Nickeoldeon
Nat Geo
MAN-X (I've not tried this one guv)

 

[chopps]

Dammit xxxxxx you're too fast

 

[xxxxxx]

I test TM5402 patch123p on CCcam all the same problems like TM6900s

TM5402 TM6800s TM6900s TM6902 all haveing the same problems

 

[jaymes]

I test TM5402 patch123p on CCcam all the same problems like TM6900s

TM5402 TM6800s TM6900s TM6902 all haveing the same problems

Yes m8 thoroughly agree. Zorch has put it in a nutshell in post #3.

Similarities:

TM5400
123p
TM6900
147p

TM5400
117p
TM6900
726p

 

[Zorch]

Hi jaymes et al,

The reason why I think that Phantompatch 117 is the most stable/reliable patch to date is because it is based on TM Original Software 1.17

Have a look at the comparisons (below) which show the O/S sizes and the associated Patch sizes... you will notice that TM Original Software 1.20 is quite a bit smaller in size to TM Original Software 1.17... so I believe that somewhere along the line something important to the overall stability of the O/S may have been omitted/disregarded from TM Original Software 1.20

TM Original Software v1.11 (5.92MB)

Phantompatch 111 (6.39MB) ~ 470kb extra code added into patch
Phantompatch 111 v2 (6.39MB) ~ 470kb extra code added into patch
Phantompatch 112 (6.39MB) ~ 470kb extra code added into patch
Phantompatch 115 (6.40MB) ~ 480kb extra code added into patch
Phantompatch 116 (6.40MB) ~ 480kb extra code added into patch

TM Original Software v1.17 (5.94MB)

Phantompatch 117 (6.41MB) ~ 470kb extra code added into patch
Phantompatch 118 (6.48MB) ~ 540kb extra code added into patch
Phantompatch 118 v2 (6.48MB) ~ 540kb extra code added into patch

TM Original Software v1.20 (5.83MB)

Phantompatch 120 (6.30MB) ~ 470kb extra code added into patch
Phantompatch 121 (6.30MB) ~ 470kb extra code added into patch
Phantompatch 123 (6.44MB) ~ 610kb extra code added into patch

Best Wishes,
Zorch

 

[jaymes]

Hi jaymes et al,

The reason why I think that Phantompatch 117 is the most stable/reliable patch to date is because it is based on TM Original Software 1.17

Have a look at the comparisons (below) which show the O/S sizes and the associated Patch sizes... you will notice that TM Original Software 1.20 is quite a bit smaller in size to TM Original Software 1.17... so I believe that somewhere along the line something important to the overall stability of the O/S may have been omitted/disregarded from TM Original Software 1.20

TM Original Software v1.11 (5.92MB)

Phantompatch 111 (6.39MB) ~ 470kb extra code added into patch
Phantompatch 111 v2 (6.39MB) ~ 470kb extra code added into patch
Phantompatch 112 (6.39MB) ~ 470kb extra code added into patch
Phantompatch 115 (6.40MB) ~ 480kb extra code added into patch
Phantompatch 116 (6.40MB) ~ 480kb extra code added into patch

TM Original Software v1.17 (5.94MB)

Phantompatch 117 (6.41MB) ~ 470kb extra code added into patch
Phantompatch 118 (6.48MB) ~ 540kb extra code added into patch
Phantompatch 118 v2 (6.48MB) ~ 540kb extra code added into patch

TM Original Software v1.20 (5.83MB)

Phantompatch 120 (6.30MB) ~ 470kb extra code added into patch
Phantompatch 121 (6.30MB) ~ 470kb extra code added into patch
Phantompatch 123 (6.44MB) ~ 610kb extra code added into patch

Best Wishes,
Zorch

Hi Zorch
Excellent comparisons. Reading through replies to latest tests of TM 5402 and TM6900 it stands out that Best Patch for TM 5402 seems to be 117p and for TM6900 726p. As a user of a TM6900 the latest stable patch I have found stable is 737p, but 726p seems to have more going for it.

@Phantom would be interesting to hear your views on the views of Zorch. And thanks again Phantom for your continued support.

 

[holmroad]

Hi Zorch
Excellent comparisons. Reading through replies to latest tests of TM 5402 and TM6900 it stands out that Best Patch for TM 5402 seems to be 117p and for TM6900 726p. As a user of a TM6900 the latest stable patch I have found stable is 737p, but 726p seems to have more going for it.

@Phantom would be interesting to hear your views on the views of Zorch. And thanks again Phantom for your continued support.

Omly thing AGAINST 726P is that ORF 19E and more importantly Bulsat 39E (I THINK I'm right - but may not be?) dont open?:Cool2:

 

[wolftje]

@CHOPP, So you got the latest patch and rolled back to 1.17 and now everything is working as it should. Gonna try this out ! (TM5402HD)
Quote "
[h=2]Re: New Phantompatch-TM5402HD-ALL_123p_10-07-2012[/h]

C+ Ned was fixed about 3 patches ago on 5402, but it broke others on 19.2.
Apart from TNT they seem good now.

Motor has been stopping on channel change since around 1.16 approx.

I'm not clearing anything apart from UK on 8281 at present either using newcamd.
This might be my provider - can someone else check italy, germany, spain please?

Edit: Just rolled back to 1.17 and all now clearing. Someone else definitely needs to try this please.
​

"

 

[chopps]

@CHOPP, So you got the latest patch and rolled back to 1.17 and now everything is working as it should. Gonna try this out ! (TM5402HD)
Quote "
[h=2]Re: New Phantompatch-TM5402HD-ALL_123p_10-07-2012[/h]

C+ Ned was fixed about 3 patches ago on 5402, but it broke others on 19.2.
Apart from TNT they seem good now.

Motor has been stopping on channel change since around 1.16 approx.

I'm not clearing anything apart from UK on 8281 at present either using newcamd.
This might be my provider - can someone else check italy, germany, spain please?

Edit: Just rolled back to 1.17 and all now clearing. Someone else definitely needs to try this please.
​

"

No I wouldnt say everything is working as it should. 'all clearing' was a comment re newcamd not softcam, sorry


1.17 softcam clears everything it should, apart from C+NL, and cccam/newcamd also work fine.
1.23 softcam clears everything it should including C+NL, but TNT freezes now. Newcamd doesn't work on S Italia S germany or D+ (for me at least)

What I meant was that rolling back to 1.17 resulted in my Italy, Germany and Spain packages clearing properly again - with newcamd.

 

[holmroad]

No I wouldnt say everything is working as it should. 'all clearing' was a comment re newcamd not softcam, sorry


1.17 softcam clears everything it should, apart from C+NL, and cccam/newcamd also work fine.
1.23 softcam clears everything it should including C+NL, but TNT freezes now. Newcamd doesn't work on S Italia S germany or D+ (for me at least)

What I meant was that rolling back to 1.17 resulted in my Italy, Germany and Spain packages clearing properly again - with newcamd.

Do Sly Italia, Germany & UK open EVENTUALLY mate if you wait 5 mins - or LITERALLY not at all?:Cool2:

 

[chopps]

Didn't really have the time or patience to leave it longer than a few mins, or to try rebooting or stop-starting the cam.
Will perform another more considered test in the next day or so.

PS UK opened fine on 123, just the other Europeans didn't.

 

[Timelord]

Re: New Phantompatch-TM5402HD-ALL_123p_10-07-2012
Hi all sport on 13 would not open when 1.23 installed but i went back to 1.18 and all ok !
i am noob and have a provider, could there be a conflict in 1.23 and provider ?
and yes motor stops on chan change (not so big issue)
I will try more sats tommo and post any new findings
happy hunting to all, timelord.