P4TCA
'Stupid Scottish White Guy'
I am trying to set up a s10 with a TM-2600 motor. I had to get a new motor as the old one died (used a 500s then). The motor has been set up and recieves 28.2 as per channel file I put on box. I have added 13.0 and 19.2 in the satellite list and activated them or ticked them. I have set the motor as diseq 1.2 on all satellites. I have then stored 13.0 and 19.2 in positions.
I have set LNB frequency to universal for both but cant get either to change transponder. The message No TP is there with no other options. The signal intensity is 44% and quality is 10% on both. I have tried moving manually in motor settings but there is no budge in signal strength. HELP!!!
Is it posible to upload via usb an image with correct motor settings?
I have set LNB frequency to universal for both but cant get either to change transponder. The message No TP is there with no other options. The signal intensity is 44% and quality is 10% on both. I have tried moving manually in motor settings but there is no budge in signal strength. HELP!!!
Is it posible to upload via usb an image with correct motor settings?
Last edited: