Mgcam

[AJT]

Ok but you have typed in incorrectly above is that a typo?

If its user/softcams/MGcamd 1.35a then you typed Mgcamd.1.35a?? Is there supposed to be a dot or a space?

if you like you can also stop it throught he boxes cam menu I'm sure

Hi will stop it in box.
And it is like that in list in putty with those dots.

Okay getting
mtdblock?

when i change channel nothing happens in putty

This is with out changing channels.

vusolo2 login: root
root@vusolo2:~# ps

 

[AJT]

After switching channels a few times.

 

[wiz569]

The problem is you are not stopping MGcamd at all m8,

You need to type in Putty,once logged in killall -9 MGcamd.1.35a

We cant move on till we are sure its not running

 

[AJT]

okay killed it.Now whats next.

vusolo2 login: root
root@vusolo2:~# killall -9 MGcamd.1.35a
root@vusolo2:~# ps

now with it stopped and started...

root@vusolo2:~# /usr/softcams/MGcamd.1.35a
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:33:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: mips dreambox (dm7025, dm800)
root@vusolo2:~# Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = custr75:blah.dns.me:11112
newcamd keep alive: 300, incoming port: 21000
network port 21000 open: bind error 125: Address already in use
[mgcam] emm thread started
[newcamd] Connecting to blah.dns.me:11112...
[cccamd] My nodeID be447848ac851863
[newcamd] Login to blah.dns.me:11112 as custr75 accepted (19ms)
[newcamd] Card data from blah.dns.me:11112 (74ms):
Userid 2 caid 963 providers 1
Idents: 000000

 

[wiz569]

okay killed it.Now whats next.

vusolo2 login: root
root@vusolo2:~# killall -9 MGcamd.1.35a
root@vusolo2:~# ps

now with it stopped and started...

root@vusolo2:~# /usr/softcams/MGcamd.1.35a
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:33:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: mips dreambox (dm7025, dm800)
root@vusolo2:~# Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = blah:blah.dns.me:11112
newcamd keep alive: 300, incoming port: 21000
network port 21000 open: bind error 125: Address already in use
[mgcam] emm thread started
[newcamd] Connecting to blah.dns.me:11112...
[cccamd] My nodeID be447848ac851863
[newcamd] Login to blah.dns.me:11112 as custr75 accepted (19ms)
[newcamd] Card data from blah.dns.me:11112 (74ms):
Userid 2 caid 963 providers 1
Idents: 000000

Ok that shows that its reading your nline and clearing the channel,
you will need to remove the nline and leave the cline so we can see if it errors,

ps I am editing the details as its showing your servers details

 

[AJT]

With Nline removed and Cline still in place.


root@vusolo2:~# /usr/softcams/MGcamd.1.35a
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:33:7:1:2s Show ecm:2, emm:2 Up:1 Au:1 Dir:0 Osd:no:80:0 Cache:4 Log:0:no ip:28007 Reread:0

 

[wiz569]

With Nline removed and Cline still in place.


root@vusolo2:~# /usr/softcams/MGcamd.1.35a
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:33:7:1:2s Show ecm:2, emm:2 Up:1 Au:1 Dir:0 Osd:no:80:0 Cache:4 Log:0:no ip:28007 Reread:0

Does it not show anything different if you change channels,obviously premium ones m8?

 

[AJT]

Sorry here you go mate....

root@vusolo2:~# /usr/softcams/MGcamd.1.35a
tuxbox mgcamd v1.35a by mixvt (compiled Jan 26 2010 15:59:20)
[mg] Net:33:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: mips dreambox (dm7025, dm800)
root@vusolo2:~# Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = P▒:▒jPR_%:6560
newcamd keep alive: 300, incoming port: 21000
[mgcam] emm thread started
[newcamd] Connecting to ▒jPR_%:6560...
[newcamd] Can't open host ▒jPR_%:6560
[cccamd] My nodeID be447848ac851863
got 153 cmd 9F
[mg0] namespace 11A0000 t-id 7F1 on-id 2
[mg0] descramble on 1, source 0
[mg0] service F46 index 0 pmt pid 104 (1), pids: video 0x0203, audio 0x0283 0x0900 0x0297
[mg0] ECM: CaID: 0x0963 -> CaPID: 0x0500 ProvID: 000000
[mg0] ECM: CaID: 0x0961 -> CaPID: 0x0500 ProvID: 000000
[mg0] ECM: CaID: 0x0960 -> CaPID: 0x0500 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0500 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0500 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0500 failed to decode.
[mgcamd] emm started
EMM: CaID: 0x0960 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0961 -> CaPID: 0x00C0 ProvID: 000000
EMM: CaID: 0x0963 -> CaPID: 0x00C0 ProvID: 000000
[mgcamd] emm stopped
[mg0] stoping camd..
[mg0] stopped
got 153 cmd 9F
[mg0] namespace 11A0000 t-id 7F1 on-id 2
[mg0] descramble on 1, source 0
[mg0] service F46 index 0 pmt pid 104 (2), pids: video 0x0203, audio 0x0283 0x0900 0x0297
[mg0] ECM: CaID: 0x0963 -> CaPID: 0x0500 ProvID: 000000
[mg0] ECM: CaID: 0x0961 -> CaPID: 0x0500 ProvID: 000000
[mg0] ECM: CaID: 0x0960 -> CaPID: 0x0500 ProvID: 000000
[mg0] network can't decode
[mg0] pid 0x0500 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0500 failed to decode.
[mg0] network can't decode
[mg0] pid 0x0500 failed to decode.
[mgcamd] emm started

 

[wiz569]

Hmm its not even trying to access your cline, is this an outside line or inside line m8,the cline that is?

Will have to come back to this tomorrow as I'm just about to log off the pc now m8,will be on the tablet but its not as good for helping from

 

[AJT]

Hmm its not even trying to access your cline, is this an outside line or inside line m8,the cline that is?

Will have to come back to this tomorrow as I'm just about to log off the pc now m8,will be on the tablet but its not as good for helping from

outside mate both N and C.I was suffering alot of glitching so thought having 2 lions and have it pick the best at the time might help but what a pain to set up.i have done the B(06) and G(33) in mg-cfg is there anything else that may need changing in that?
Also do the other files need to be in var/keys replace.proirty,peer,ignore.list.?

 

[wiz569]

outside mate both N and C.I was suffering alot of glitching so thought having 2 lions and have it pick the best at the time might help but what a pain to set up.i have done the B(06) and G(33) in mg-cfg is there anything else that may need changing in that?
Also do the other files need to be in var/keys replace.proirty,peer,ignore.list.?

Might be better running oscam as you can load balance with it, but wait till tomorrow and we can try again

 

[AJT]

Might be better running oscam as you can load balance with it, but wait till tomorrow and we can try again

I just dont know why the devil its not working.maybe the mg_cfg file is wrong.?but i have tried different formats but still no read of sealion
Neolion works great and in fact i am getting a super smooth glitch free picture on mgcamd opposed to ccam on the same neolion.

 

[wiz569]

I just dont know why the devil its not working.maybe the mg_cfg file is wrong.?but i have tried different formats but still no read of sealion
Neolion works great and in fact i am getting a super smooth glitch free picture on mgcamd opposed to ccam on the same neolion.

That will be the case as your meant to use mgcamd for nlines

Not sure why the sealion is not working, although even if we do get it running I would not be confident of mgcamd switching between them as smoothly as you would like

 

[AJT]

That will be the case as your meant to use mgcamd for nlines

Not sure why the sealion is not working, although even if we do get it running I would not be confident of mgcamd switching between them as smoothly as you would like

Okay mate...maybe best option is have mgcam with neoline and ccam with sealion and just switch from one to other when needed

 

[AJT]

Okay mate...maybe best option is have mgcam with neoline and ccam with sealion and just switch from one to other when needed

If there is a good working solution that wont involve me swapping cams let me know
Many thanks for all.

 

[Ferret]

If there is a good working solution that wont involve me swapping cams let me know
Many thanks for all.

On the Blackhole image you have the autocam option, this enables you to choose which cam open a certain channel its time consuming but once setup cams will stop and start automatically on channel change.

 

[AJT]

On the Blackhole image you have the autocam option, this enables you to choose which cam open a certain channel its time consuming but once setup cams will stop and start automatically on channel change.[/QUOTE)

Good Morning mate.I have put both my lions into Ccam.cfg and it is doing what you mentioned by itself already running vix.
It seems to pick the quickest ecm and chooses correct cam for the channels it should.I dont know how it does it but it does.

 

[Ferret]

On the Blackhole image you have the autocam option, this enables you to choose which cam open a certain channel its time consuming but once setup cams will stop and start automatically on channel change.[/QUOTE)

Good Morning mate.I have put both my lions into Ccam.cfg and it is doing what you mentioned by itself already running vix.
It seems to pick the quickest ecm and chooses correct cam for the channels it should.I dont know how it does it but it does.

It will do that mate if you had ten lines in there it would use the first to respond.

I thought you where meaning you wanted to use different emus with specific lines.

 

[AJT]

It will do that mate if you had ten lines in there it would use the first to respond.

I thought you where meaning you wanted to use different emus with specific lines.

No mate i just wanted to use 2 lions at once so it would give me all the channels associated with the lions without needing to switch lions,I did not know you could put 2 or more lions in Ccam,cfg at once.I dont know what a emu is really,or i do but dont know its called a emu.I guess its short for emulator and i guess that means it enables something??

 

[wiz569]

No mate i just wanted to use 2 lions at once so it would give me all the channels associated with the lions without needing to switch lions,I did not know you could put 2 or more lions in Ccam,cfg at once.I dont know what a emu is really,or i do but dont know its called a emu.I guess its short for emulator and i guess that means it enables something??

Jeez m8 never realised thats all you wanted to do, we could of had you up and running ages ago lol