JIMLCHIPIT
Inactive User
- Joined
- Sep 16, 2004
- Messages
- 627
- Reaction score
- 2
It's Ok Folks - Sorted It.
tutorial looks good but! i'm having problems with flash programmer 2.62, i keep getting error : target communications error: PC to target cable disconnected!! i've checked my connections and port settings, has anyone else had this problem??
So this works for both 4000 series box's. The 4001 and 4010 ?
Ta
Hi Clive58,My tut will also tell you where and when to use the 4000 rar file or make one of your own if you read it carefully.
Clive.
Thanks for you're reply clive.if its a Sammy box then boot and press the down button to get into the navigator, if not just boot as normal for jtaging, ie if you can connect with OCD and view your ird you can dump the macro to it or back it up using Flash Programmer_2.6.2 which you cconvert into a macro file with MAC MAKER V3 then patch it to your box using OCD Commander.
Clive.
Thanks for the reply Clive...just for final clarification:Well all that would do is put your box back to how you had it lol.
1st, You need to send this macro from HERE
and then reset your net id and freq' and symb' rate to your area.
After that you should have a working pin box which is setup for your area and pin etc ok.
Once that is done you can then dump the info from your 4k box and convert it to a macro file for future use.
Clive.
Correct !Thanks for the reply Clive...just for final clarification:
1) The 4000.rar macro file needs to be dumped to my box using OCD Commander.
Not at this stage but once your box has pin function you may want to.I assume this means that I don't need to read/convert any files?
You can send the BYTE commands in OCD for your net id as you will already be in OCD just after the macro is sent.2) How can I reset my net id (as im in exC*W)? I heard the funcard method doesn't work
?
Well if you had more than one box to sort out, then making your own macro file (as i discribed in my tut with your own net id and pin number and freq' and symb' rate etc in from your working box) will save you time on any further boxes you have to set for your area as the macro will have your net id etc embedded in it3) Once that is done you can then dump the info from your 4k box and convert it to a macro file for future use - could you expand on this a little more, what does this mean?
- How do I do this and what are the byte commands for setting my net ID (I'm in 41047)You can send the BYTE commands in OCD for your net id as you will already be in OCD just after the macro is sent.
More "Final" questions? lolThanks again Clive.
Just a couple of final questions:
Good idea just to backup like (not usually needed but a safe idea)1) Should I not read the current dump on my modded box, just incase something goes wrong?
when your in OCD after sending the macro type in:2) - How do I do this and what are the byte commands for setting my net ID (I'm in 41047)
3) Will my IRD and BK change or will this remain as what it is currently?
Thanks again for you're help thus far!
V.I.P
You can send the BYTE commands in OCD for your net id as you will already be in OCD just after the macro is sent.
Well if you had more than one box to sort out, then making your own macro file as i discribed in my tut with your own net id and pin number and freq' and symb' rate etc in from your working box will save you time on any further boxes you have to set for your area as the macro will have your net id etc embedded in it
Clive.
when your in OCD after sending the macro type in:
BYTE 0x3120000C = $A0
BYTE 0x3120000D = $57
BYTE 0x3120000E = $13
BYTE 0x3120000F = $2B
We use essential cookies to make this site work, and optional cookies to enhance your experience.