Lutron Project Extract

OpenB

New Member
Joined
Jun 10, 2016
Messages
3
Reaction score
0
Hi,

Any ideas how I can extract the project from this processor? I've attached the error below I'm trying to use the 10.7.0 from here. Any ideas?

The processor identifies itself as Gulliver.

Thanks
 

Attachments

Mick

Administrator
Staff member
Administrator
Premium Member
Joined
Jan 19, 1999
Messages
32,015
Reaction score
8,545
can you talk to the processor in diagnostics and see what processor version you have.

you can only really communicate with the processor with the same version it was installed with - this is not always the case but you have far better chance of extracting once you use the same version and then you can upgrade once you have extracted it all to the 10.7
 

Mick

Administrator
Staff member
Administrator
Premium Member
Joined
Jan 19, 1999
Messages
32,015
Reaction score
8,545
Use telnet commands

Sorry let me elaborate:
Tools / Terminal

command = FIRMWAREREV

(you can use the drop down for the commands).

BE CAREFUL, YOU CAN KILL/WIPE A PROCESSOR WITH THE WRONG COMMANDS
 
Last edited:

OpenB

New Member
Joined
Jun 10, 2016
Messages
3
Reaction score
0
Hi,

I never actually got back to the site until just today. Thank you for your reply though I've pasted the output below, if you're still able to help.


OS Firmware Revision = 3.0.589 [May 16 2016 16:02:32]
Database Design Rev = 300014
BOOT Firmware Revision = 2.2.0

Thanks again.
 

hoytster21

New Member +
Joined
Nov 25, 2019
Messages
5
Reaction score
1
as an FYI, trying to upgrade to 10.7 from 3.0 will be a pretty daunting task, you may want to do it in steps, Ive bricked a few systems trying to upgrade that far ahead!
 
TEST
Top