Help!!! Pleeeaaassse!!!!

Insane_Jesus

Inactive User
Joined
Aug 23, 2005
Messages
531
Reaction score
1
I have recently aquired a 4010 box. The problem i am having is that the signal quality is poor and therefore the box continually tries to received the NIT. The status changes from locked to unlocked many times over a minute.
The only other thing connected to the ntl feed is a broadband modem. I have tried turning the modem off but it makes no change to the digibox.
Any suggestion or ideas would be much appreciated
 
X

-X-

Guest
get a better quailty splitter and check your wiring, a lot of cheap splitters drain quite a bit of signal, along with poor cabling this could be an issue,
poss worth replacing on off chance its faulty
 

rixter

Inactive User
Joined
Oct 11, 2005
Messages
180
Reaction score
0
put the cable feed directly into the digi therefore you have no splitter and no extra cable,that narrows it down from isolator to stb,less connections to check if it dosent resolve it,dodgy box or not enogh strength coming from cable drp.
 

L33tpL4y4

Inactive User
Joined
Jul 27, 2005
Messages
1,097
Reaction score
1
Check the CIM, replace it if you have a spare.
 
TEST
Top