Fano
Inactive User
Can Flash wizard pro flash a dreambox as effectively as Dreamup using a Null modem cable ?
I have been flashing my 500s over the Lan using Flash wizard pro and it seems to work effectively.
I have seen that the newer versions of Gemini are "only running in flash (it has been only tested that way)".
What exactly does that mean ?
I have been setting up my new 500s the last few days .
I flashed it with Gemini 3.4 and networked it successfully ,also loaded CCCam.
I currently have it set up on my Sky Minidish pointed at 28.2 E until I receive my motorised mount.
Initially it was working well ,signal level was around 85% on average but now the signal keeps dropping and I get large BER levels.
It is especially prevalent on low frequency transponders.
The box locks up and I have to reboot it .
I've tried the Dreambox connected to a friends 80cm dish which has a very strong signal ~95% but the same thing happens .
Its fine for 5-10 minutes but then the ber goes mad.
Is this an image issue or a faulty tuner ?
After flashing when I try the Satfind option the signal strength is good and I can do an automatic transponder scan.
I tune about 50 channels in ,then I stop the scan and watch a few channels.
It seems to work well.
If I plug out the box and restart it though I get an error 'Switch ,No Service Found' for all the entries .
The Satfind cannot lock onto any transponder .
Its as if the tuner cant pick up any signal .
I have been flashing my 500s over the Lan using Flash wizard pro and it seems to work effectively.
I have seen that the newer versions of Gemini are "only running in flash (it has been only tested that way)".
What exactly does that mean ?
I have been setting up my new 500s the last few days .
I flashed it with Gemini 3.4 and networked it successfully ,also loaded CCCam.
I currently have it set up on my Sky Minidish pointed at 28.2 E until I receive my motorised mount.
Initially it was working well ,signal level was around 85% on average but now the signal keeps dropping and I get large BER levels.
It is especially prevalent on low frequency transponders.
The box locks up and I have to reboot it .
I've tried the Dreambox connected to a friends 80cm dish which has a very strong signal ~95% but the same thing happens .
Its fine for 5-10 minutes but then the ber goes mad.
Is this an image issue or a faulty tuner ?
After flashing when I try the Satfind option the signal strength is good and I can do an automatic transponder scan.
I tune about 50 channels in ,then I stop the scan and watch a few channels.
It seems to work well.
If I plug out the box and restart it though I get an error 'Switch ,No Service Found' for all the entries .
The Satfind cannot lock onto any transponder .
Its as if the tuner cant pick up any signal .