DM500 not seeing card

[pburns]

Cud someone please post cccam.cfg file for dreambox
DM500s running Nabilosat Darkstar II Exclusive
CCcam 2.1.2, with white card. (edit out your details).
Been at this all day and cant get it to see
card.
Thanx

 

[charlie senator]

All you need is the
Server listen port usually 12000 but i would change this
The smartcard clock frequency
Try this if the normal one doesn't work
SMARTCARD CLOCK FREQUENCY : /dev/sci0 600000
and the boxkey
so your config should look like this

SERVER LISTEN PORT : 12000
SNARTCARD CLOCK FREQUENCY : /dev/sci0 600000
BOXKEY : /dev/sci0/ xx xx xx xx

Btw i only tried this on Cccam 2.14

 

[apple_crusher]

you and me oth pal i tried for about two weeks just cant get a ATR from the card getting fed up now....

 

[fes_786]

if u got those lines in config and it still dont see card try another dm

i had same problem it was driving me nuts

then i tried same setup in another dm500s and it worked 100%

 

[bod]

i also had this prob with a nab. image, tried multiple scripts
in the end just re-flashed with Pli and worked 1st. time

 

[Ten Below]

All you need is the
Server listen port usually 12000 but i would change this
The smartcard clock frequency
Try this if the normal one doesn't work
SMARTCARD CLOCK FREQUENCY : /dev/sci0 600000
and the boxkey
so your config should look like this

SERVER LISTEN PORT : 12000
SNARTCARD CLOCK FREQUENCY : /dev/sci0 600000
BOXKEY : /dev/sci0/ xx xx xx xx

Btw i only tried this on Cccam 2.14

This is where the problem lies, the white card is only read directly with cccam 2.13 upwards. Use 2.14 it has the latest nds fixes. You only require the boxkey for the premiem channels. If you do require the box key there is a programme on the net that will generate the correct one for your card.
Just google the bold words if you do.Hope this helps.

 

[g3o]

you and me oth pal i tried for about two weeks just cant get a ATR from the card getting fed up now....

if it's only ATR you are missing it's not the config set up it's the vpid of the channels.


OP do you know if the card reader actually works in the box?

 

[g3o]

This is where the problem lies, the white card is only read directly with cccam 2.13 upwards. Use 2.14 it has the latest nds fixes. You only require the boxkey for the premiem channels. If you do require the box key there is a programme on the net that will generate the correct one for your card.
Just google the bold words if you do.Hope this helps.

The guy is using 2.14 tho....

 

[Ten Below]

Sorry guys have misread the post, original poster does say 2.12 though.