Commando 11.3 - Really the End

[dips_007]

Hi

I have converted the image to 1x but when the dboz loads it gets stuck at the image info screen.

I have tried to flash a new image but i get the below when i try and flash.

ÿdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040


will verify ELF image, start= 0x800000, size= 152952
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: | / . - \ . | / - . . \ | / - \ | . / - \ | / - \ . | / . . - . . \ | / - \ | /  done.

env: can't set "baudrate"
env: can't set "dbox_duplex"
env: can't set "lcd_bias"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 670474 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670410 Bytes = 654.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

------ Systeminformations ------
Selected networkdevice: VIA Compatable Fast Ethernet Adapter - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.2
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 3 (Build 2600)
------ Powered by Hallenberg.com ------

 

[wakkaday]

a couple of questions.

1) i always have to press the button at the box to power on the dbox with this image? before i could use the remote, how can i change this?

2) i have manually updated my bouquet and transferred across, but its not updating on the system? ( powered off and restarted / reloaded channel list etc - even messed around with the option of channels in vm order / alphabetical - still no luck)


3) quite a few of the channels are glitchy and sometimes they settle, or they don't at all...find it strange

any help for the above, appreciated?

 

[frederick]

it really shouldnt do any of the above...my 1st suggestion would be to do a clean reflash and see if you get the same issues

 

[trev89]

hi image is good easy to use froze twice and had to reboot to get channels back once just went off :/ but overall a very good image thanks to all involved

 

[Random73]

Just got the image and will try it out after work


cheers

 

[trev89]

hi image was working fine but now freazing atleast once a hour any ideas ppl thanks trev

 

[mak999]

OK I have uploaded commando 11.3 converted to 1x using image converter and it is as good as every1 says.

I didn't bother copying over my backed up bouquet and services file, instead I did a bit of "magic" and ran fast scan after selecting my area. After reboot most channels back, seem to be missing the most important 1's .. s-sports 1 2 and 3 and s-premier & +1 have gone.

Anybody help???? I have downloaded bouquet wizard any1 now what to do next??

Thanks

 

[AN0071]

Simply Brilliant! This image has solved ALL my previous issues! Cheers all for your amazing work!

 

[premprop51]

hi,trying to flash another image to my nokia dbox was not working then tryed to flash this 1 but it wont let me do it.....is there anyway to completly wipe my box and start again or is this a bad idea......HELP, thanx

 

[Messa]

hi,trying to flash another image to my nokia dbox was not working then tryed to flash this 1 but it wont let me do it.....is there anyway to completly wipe my box and start again or is this a bad idea......HELP, thanx

Use IFA (image Flashing Assistant) to install an image on a no-responding box.

The FAQ are here........

http://www.kleinanzeigen-dienst.de/dbox2/BeginnersGuide.pdf

 

[premprop51]

thanx messa,
i managed to flash this to dbox but can still only get fta,how do i change to chmod 755 evocamd?.....sorry to be a pest but im new to this or could there be another simple problem?

thanx.

 

[Messa]

thanx messa,
i managed to flash this to dbox but can still only get fta,how do i change to chmod 755 evocamd?.....sorry to be a pest but im new to this or could there be another simple problem?

thanx.

Have you installed the 'Magic files' ?

 

[woosh]

thanx messa,
i managed to flash this to dbox but can still only get fta,how do i change to chmod 755 evocamd?.....sorry to be a pest but im new to this or could there be another simple problem?

thanx.

If you know how to use telnet:

> telnet xxx.xxx.xxx.xxx
Trying xxx.xxx.xxx.xxx...
Connected to xxx.xxx.xxx.xxx.
Escape character is '^]'.


#######################################################
# #
# # Digital Worldz Neutrino # #
# # # #
# # # # UK Underground at it's Best... # # # #
# # # #
# # Digital World Cable # #
# #
#######################################################

Welcome to your dbox Kernel 2.6.9 (00:43:05)
dbox login: root
Password:


BusyBox v1.14.3 (2009-08-11 18:03:51 BST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ > chmod 755 /var/bin/emu/evocamd

 

[premprop51]

no not installed magic files yet......ill give it a try, how easy is it? thanx.

 

[woosh]

no not installed magic files yet......ill give it a try, how easy is it? thanx.

Easy as EFF TEE PEE & nothing to be afraid of.

 

[woosh]

Easy as EFF TEE PEE & nothing to be afraid of.

You can even do the chmod bit from the thing you're reading this in! :-

http://xxx.xxx.xxx.xxx/Y_Tools_Cmd.yhtm

 

[whack]

hi guys, just got a box with this new image on, looks good but I cant connect with it as I dont know the ip addy? Normally update boxes by flashfkp and when I look in the network on the image there isnt anything there in Ip address? Can any kind soul advise me please?

 

[wiz569]

If DHCP is ticked in the network settings then your routers config page will have the ip addy of the box,
or else just assign one manually,making sure to turn DHCP off and network on boot to on.

 

[premprop51]

Iv downloaded the magic files how do i go about loading them to my box?

 

[whack]

If DHCP is ticked in the network settings then your routers config page will have the ip addy of the box,
or else just assign one manually,making sure to turn DHCP off and network on boot to on.

cheers for the help wiz all sorted thanx