Incoming requests from all over the place from the gbox brigade about their favourite cam not working in C10. Herewith an explanation, and a filthy dirty non- Team Commando 3rd party fix!
-----------------------------------------------------------
Because gbox has never gone 'open-source' as have evocamd and mgcamd, it has always been Team-Commando policy NOT to include support for it in any shape or form, sorry.
This policy has been even more rigidly enforced now that gbox can no longer AU, so needs auto key-copy scripting to get it working properly...
But I know there are many peeps out there whose boxes will only run stable on gbox, so I've come up with an unofficial 'dirty patch' using stuff nicked from my \/irgin+2.1 image, and which is dead easy to pop into Commando 10.
The miniops file goes into /bin (not /var/bin), overwriting existing. Check it stays as chmod 755 - (it should do).
shellexec.conf lives in /var/tuxbox/config - and again, you overwrite existing.
From other sources, you'll need to pop camd2 and gbox into /var/bin/emu and chmod 755 both of them, or it won't work!
Last but not least, you'll need gbox_cfg in /var/keys - and this must be the non-AU version included in my rar file.
Destructions:
1. With evocamd running with up to date keys-
2. Press Blue > Blue > Blue- 'Smart Switch to Gbox
3. Congratulations! You're now on gbox!
Trouble is, I can't get this working 'on the fly' as I have with \/+2.1 - it freezes the picture, and won't clear even with a channel Up-Dn. So the answer is to reboot after changing to gbox- when all will be well. Sorry about that- it's probably conflicting with something Renny has done with his new Softcam Menu. (But I will look further into this!)
Later, if the keys roll and you find yourself FTA only, go Blue > Red and start evocamd. After AU- repeat items 2) and 3) above. For test and educational purposes ONLY, of course!
Cheers- AL
many thanks al, will put this on later when the mrs has gone to bed and have a play around