Cloud ibox 4 not flashing from usb

[rosseh]

Hi there,

My cloud ibox 4 isnt flashing from usb, i have tried openpli so far and also openvix with no success. I'm leaving the box powered off, sticking usb in and then powering on. The red light at the front stays static and ive left it for 20 minutes and nothing seems to happen, the original image just comes back again.

Any ideas what the problem is?

Thanks

 

[Ferret]

Hi there,

My cloud ibox 4 isnt flashing from usb, i have tried openpli so far and also openvix with no success. I'm leaving the box powered off, sticking usb in and then powering on. The red light at the front stays static and ive left it for 20 minutes and nothing seems to happen, the original image just comes back again.

Any ideas what the problem is?

Thanks

It could be that you have flashed one of the images containing the driver time bomb driver and it now bricked and will need to be jtagged.

Try another usb stick but if that does not work then read the jtag thread in this section.

 

[turner brown]

try another usb stick as i found there a little picky with the usb stick used

 

[rosseh]

Managed to get the sly skin onto the openvix image already on it but when i try to install TSMedia i get an error, Any ideas?

Also what is best and most updated sly skin for the openvix image?

cheers

 

[Ferret]

Managed to get the sly skin onto the openvix image already on it but when i try to install TSMedia i get an error, Any ideas?

Also what is best and most updated sly skin for the openvix image?

cheers

Install tsmedia via telnet with this command.

opkg update && opkg install -force-overwrite /tmp/*.ipk

It will also install the dependencies needed to run.

 

[rosseh]

Install tsmedia via telnet with this command.

opkg update && opkg install -force-overwrite /tmp/*.ipk

It will also install the dependencies needed to run.

tried that, done it all ok but it said invalid gzip magic.

cheers

 

[rosseh]

tried that, done it all ok but it said invalid gzip magic.

cheers

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for enig
* python-pycrypto *
* opkg_install_cmd: Cannot install package enigma2-plugin-extensions-tsmedia.

 

[Ferret]

Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for enig
* python-pycrypto *
* opkg_install_cmd: Cannot install package enigma2-plugin-extensions-tsmedia.

Install the attached with the same telnet command then try tsmedia again.

 

[rosseh]

Install the attached with the same telnet command then try tsmedia again.

Thanks very much mate, all working now! Managed to get Plex on too, it wasnt working before.

cheers