Cannot boot Dbox

riocht

riocht

Inactive User
Joined
Nov 18, 2006
Messages
84
Reaction score
1
Hello, I flashed my Dbox with the new Laky-pro-1.img, then it would not reboot just stayed at loading kernal. I then flashed the old image back to the box using Flash FXP but I could not get into settings through the Dbox button to install the image.So I set up my null modem cable and used IFA to flash the box but the box just stalls after about 10 seconds and it will not take the image. Any help please. Here is the file from IFA it might make sense to someone.
Cheers.




üdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
üdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032


will verify ELF image, start= 0x800000, size= 154332
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Apr 7 2008 - 06:04:09)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ | / - \ . | / - \ | / - \ | / . - \ . | . / . - . \ | / . - \ | . /  done.

env: found "console"
env: found "baudrate"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 670086 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670022 Bytes = 654.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

------ Systeminformations ------
Selected networkdevice: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.8
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------
 
riocht said:
Hello, I flashed my Dbox with the new Laky-pro-1.img, then it would not reboot just stayed at loading kernal. I then flashed the old image back to the box using Flash FXP but I could not get into settings through the Dbox button to install the image.So I set up my null modem cable and used IFA to flash the box but the box just stalls after about 10 seconds and it will not take the image. Any help please. Here is the file from IFA it might make sense to someone.
Cheers.




üdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
üdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032


will verify ELF image, start= 0x800000, size= 154332
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Apr 7 2008 - 06:04:09)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ | / - \ . | / - \ | / - \ | / . - \ . | . / . - . \ | / . - \ | . /  done.

env: found "console"
env: found "baudrate"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 670086 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670022 Bytes = 654.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

------ Systeminformations ------
Selected networkdevice: Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.8
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------
Click to expand...

can you get as far as network id.

kopking
 
Anyone any idea

Anyone tell me what is wrong please?

ýdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
------ Systeminformations ------
Selected networkdevice: Accton EN1207F Series PCI Fast Ethernet Adapter - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.201
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------
 
can you get as far as network id.

kopking

No I cannot but I know the address and I can connect using Flash FXP but I cannot use the remote to install the flash
 
boot net failed

The bootp request of the box didn't reach IFA. Something is blocking the network. Firewall, av soft, wrong network cable, .....
 
riocht said:
can you get as far as network id.

kopking

No I cannot but I know the address and I can connect using Flash FXP but I cannot use the remote to install the flash
Click to expand...

It must be a corrupt image.

try flashing another image.

use IFA, Because you wont need to use a remote for that.
 
I cannot use IFA because The bootp request of the box does not reach IFA. I have flashed with IFA several times but cannot get it to work this time. I am trying to transfer an image using Hyperterminal now.

Update: now I have Kein System showing on box. It's doing my head in.!!!!!!!!!!!!!!!!!!
 
Last edited:
just tried the hyperterminal tut,,lost me for a bit,,tried the ifa again, when still didnt flash,,i typed in help,,then typed reset, looked to be flashing image (delete/then writing) but when finished was still old sportster(was triyin Andromeda) did the usual reboot after flash,,and sportster loaded, (after about an hour of tryin) just luck or what,,,try it,,in ifa after it failed to flash,,type help,,then next promt,,reset,,good luck
 
riocht said:
I cannot use IFA because The bootp request of the box does not reach IFA. I have flashed with IFA several times but cannot get it to work this time. I am trying to transfer an image using Hyperterminal now.

Update: now I have Kein System showing on box. It's doing my head in.!!!!!!!!!!!!!!!!!!
Click to expand...

kein system might be good news, atleast u can use ifa now. lol

kopking
 
You must log in or register to reply here.

Similar threads

D
Xbox 360 Trinity RGH Bricked?
Replies
1
Views
3K
spud1966
spud1966
Julez101
Install Enigma 2 On Your Miraclebox 6 HD PVR (1st)Dual Boot
Replies
2
Views
5K
Julez101
Julez101
P
dbox just fainted and wont come round
Replies
18
Views
2K
phezo
P
D
Issue flashing with IFA
Replies
6
Views
975
dips_007
D
B
Dbox stuck before lade
Replies
2
Views
1K
BigMart
B
Back
Top