Argon/Infectus programming software and firmware

Highlander

VIP Member
VIP Member
Joined
Jun 1, 2001
Messages
13,283
Reaction score
514
Location
Manchester
INFECTUS Programmer 0.0.3.9 Final version - Built in Firmware collection - 01/04/2008

inside this ZIP file you will find:

1- Programmer 0.0.3.9
2- All firmwares for INFECTUS2 (060 / 125)
3- All firmwares for ARGON (125 / 250)
4- Infectus / Injectus USB driver
5- Infectus DLL that allow others programms to works with infectus v.1.1

Release notes INFECTUS PROGRAMMER version 0.0.3.9 (1st april 2008)

1- This new programmer version use a new DIRECTC ACTEL library that fix a BUG reported from ACTEL.
2- The JTAG programming now is update, more faster...
3- Add the support of flash SST39VF010 (wasabi flash), simple exchange the flash on INFECTUS2 with this new one and you can easy read and write it.
4- Programmer recognize if is connected an INFECTUS2 or an INJECTUS on the usb.
5- Programmer recognize how is the PLD installed and choose the correct firmware (no more mistakes between differents ACTEL versions on argon and infectus)

Folder "ARGON FIRMWARES":
include new .DAT firmwares 1.8 for ARGON that can be use ONLY with programmer 0.0.3.9

Folder "USB-Drivers3.1":
Usb drivers to manage INFECTUS2 and INJECTUS devices under WINDOWS

Foledr "INFECTUS-DLL1.1":
DLL that allow the comunication between PROGRAMMER and third party softwares. Under download area of www.infectus.biz there is a DEMO application to download to undestand well how to use this DLL.

COMPATIBILITY NOTE:
1.The programmer version 0.0.3.9 can works correctly only with DAT firmwares released in this ZIP file.
2.PROGRAMMER 0.0.3.9 will update the firmware of INJECTUS/INFECTUS HARDWARE as soon as they are connected to the PC, after this update is completed the old programmers will not work anymore.

THANX FOR NOW
INFECTUS TEAM
 

Highlander

VIP Member
VIP Member
Joined
Jun 1, 2001
Messages
13,283
Reaction score
514
Location
Manchester
ARGON SPI WASABUS 1.1 FIRMWARE (9 wires firmware for all WII )

INFECTUS TEAM - ARGON SPI - 9 WIRES FIRMWARE 1.1 (13/05/08)

In this ZIP fill you will find these things:

1- INFECTUS PROGRAMMER, beta version to manage correctly ARGON SPI update
2- wasabus_argon.bin, this is the firwmare that is necessary to flash inside the SPI flash of ARGON
3- wasabus_a125argon-1.1.dat / wasabus_a250argon-1.1.dat, these are the new ACTEL firmware to support 9 wires installation

Please read "PROCEDURE TO PROGRAM ARGON SPI.DOC" for update your argon correctly to 9 wires.

IMPORTANT: Don't connect injectus when modchip is working in the wii console, with injectus connected argon is unstable.

WASABUS debug LEDS:

The LED on the ARGON will show you if modchip is correctly working or not, is very simple

LED OFF = Don't works
LED ON = Code injection procedure is complete

REGIONAL SETUP:
Current firmware is setup by default like PAL.

To setup the other region just shortcut the pads W and R in this way:

Both to GND = modchip OFF
W to GND = JAP
R to GND = USA

Note: injectus don't works anymore in this version like configurator with switches and leds, for a problem develope. We are working on that. If there are problems with modchip we suggest to don't connect injectus when modchip is working in the console.


------
THANX FOR ALL
INFECTUS TEAM
 

Highlander

VIP Member
VIP Member
Joined
Jun 1, 2001
Messages
13,283
Reaction score
514
Location
Manchester
Argon D2c2 / D2c Firmware - Wasabus Final 2.0

ARGON D2C2 / D2C FIRMWARE - WASABUS FINAL 2.0 - 2nd june 2008

We are happy to release FINAL 2.0 WASABUS for ARGON SPI. This version is really stable and don't need anymore an ADDON OSCILLATOR that at the beginning we tought was necessary!

ENJOY A FULL SUPPORT OF D2C2 AND D2C CONSOLES!
FIRMWARES ARE REALLY GOOD FOR A3P250 and A3P125 versione

-----

IMPORTANT! the ARGON WASABUS .DAT file and .BIN file can be programmed ONLY with special version of INFECTUSPROGRAMMER.EXE attached on this ZIP file!!!
See the WORD file in attach for programming procedure.

WASABUS debug LEDS:

The LED on the ARGON will show you if modchip is correctly working or not, is very simple

LED OFF = Don't works
LED ON = Code injection procedure is complete

REGIONAL SETUP:
Current firmware is setup by default like PAL.

To setup the other region just shortcut the pads W and R in this way:

Both to GND = modchip OFF
W to GND = JAP
R to GND = USA

INFECTUS TEAM
 

Highlander

VIP Member
VIP Member
Joined
Jun 1, 2001
Messages
13,283
Reaction score
514
Location
Manchester
Argon d2c-d2c2-d2e 6+1 wires firmware - final fw2.4

fixed all bugs reported in BETA TESTING... new version here works perfectly.
Only one BIN file now for all regions.
ARGON D2C-D2C2-D2E 6+1 WIRES FIRMWARE - FINAL FW2.4 - 31th Oct. 2008
Read carefull the notes here:

-----
REGIONAL SETUP on 6+1 wires firmware ONLY:
Current firmware is setup by default like PAL.

To setup the other region just do these shortcuts:

(by default modchip is PAL)
SX TO GND = US NTSC
Y TO GND = JAP

IS NOT ANYMORE NECESSARY TO BRIDGE C and D PADS ON ARGON!!! To improve stability now you need to connect C and D to their points on WII motherboard.

WASABUS debug LEDS:

The LED on the ARGON will show you if modchip is correctly working or not, is very simple

LED OFF = Don't works
LED ON = Code injection procedure is complete

INFECTUS TEAM

note: even though it says 2.4, there is a 2.5.bin file which is more stable included
 

ryanleeis

Inactive User
Joined
Sep 3, 2013
Messages
3
Reaction score
0
hello how are you all

anyone?

is there a disc to update INFECTUS 2 modchip

is there software to update from a mac
 
Last edited by a moderator:

ryanleeis

Inactive User
Joined
Sep 3, 2013
Messages
3
Reaction score
0
Re: Argon d2c-d2c2-d2e 6+1 wires firmware - final fw2.4

ok.. so where do i download the firmware and the software.. i can't seem to get if off the forum here..
 

ib0w

Inactive User
Joined
Mar 7, 2016
Messages
1
Reaction score
0
Hi,
Can you tell me how I know if I'm having the Argon 125 or the Argon 250 chip installed in my Wii?
Regards,
Ibrahim
 
TEST
Top