Hi guys im having a bit of trouble with my 4200e,im c&w area.its been running fine for the last 12 months but latley its been a nightmare,it keeps rebooting every 30secs or so,even as as i go on the net,ive tried several other macs but its always the same.Today when ive tried to change a mac via telnet all that comes on the screen is :-
-> RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.00dB
[E5/A7]- M2 Timer expired
Deleting MAC Addr : 0*-00-**-0*-00-**
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.00dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.00dB etc,etc
ive tried BroadcomDeabugMode(1); to stop it but after that this comes on screen
-> Attempting Downstream FEC LOCK @ freq=142500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=177500000 Hz, QAM64, return=RF
so i cant run the factdef command anylonger due to the above.
My Signal Downstream is:-
Frequency 586750000 Hz Locked
Signal to Noise Ratio 34 dB
QAM 64
Network Access Control Object ON
Power Level -6 dBmV
And my upstream signal is :-
Channel ID 4
Frequency 46400000 Hz Ranged
Ranging Service ID 4569
Symbol Rate 2.560 Msym/s
Power Level 58 dBmV
on the configuration screen on the fibrecoax page it says:-
Upstream Channel ID: 4
Favorite Frequency (Hz): 586750000 ((is this right))
as i write this page it has rebooted twice,so ive had to wait for it to come back online.
Any help would be much apreciated.
i think it might be bricked but not to sure
-> RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.00dB
[E5/A7]- M2 Timer expired
Deleting MAC Addr : 0*-00-**-0*-00-**
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.00dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.50dB
RNG_RSP: Adjusting US +4.00dB etc,etc
ive tried BroadcomDeabugMode(1); to stop it but after that this comes on screen
-> Attempting Downstream FEC LOCK @ freq=142500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=149500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=156500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=163500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM256, return=RF
AnnexA: Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM64, return=RF
Attempting Downstream FEC LOCK @ freq=170500000 Hz, QAM256, return=RF
AnnexB: Attempting Downstream FEC LOCK @ freq=177500000 Hz, QAM64, return=RF
so i cant run the factdef command anylonger due to the above.
My Signal Downstream is:-
Frequency 586750000 Hz Locked
Signal to Noise Ratio 34 dB
QAM 64
Network Access Control Object ON
Power Level -6 dBmV
And my upstream signal is :-
Channel ID 4
Frequency 46400000 Hz Ranged
Ranging Service ID 4569
Symbol Rate 2.560 Msym/s
Power Level 58 dBmV
on the configuration screen on the fibrecoax page it says:-
Upstream Channel ID: 4
Favorite Frequency (Hz): 586750000 ((is this right))
as i write this page it has rebooted twice,so ive had to wait for it to come back online.
Any help would be much apreciated.
i think it might be bricked but not to sure