250 help

[rizlafoxy54321]

hi can any 1 see wot im doing wrong ? i still not online , here a copy ov my status page


----------------------------------
Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 586750000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK cmreg-ntlhm120-light.cm
Security Enabled BPI

Downstream Channel
Lock Status Locked Modulation QAM64
Channel ID 2 Symbol rate 5056941
Downstream Frequency 586750000 Hz Downstream Power -16.3 dBmV
SNR 31.6 dB

Upstream Channel
Lock Status Locked Modulation QPSK
Channel ID 5 Symbol rate 2560 Ksym/sec
Upstream Frequency 41584000 Hz Upstream Power 55.3 dBmV

CM IP Address Duration Expires
10.90.60.65 D: 05 H: 16 M: 13 S: 04 Fri Jun 08 15:12:29 2007

Current System Time: Sat Jun 02 22:59:46 2007


thanx for any help

 

[gentlex]

hi m8, Security Enabled BPI needs to be disable login in hyperterminal then do the stop scan command

Code:
cd \cm_hal
scan_stop
cd \

then enter then copy and paste the command below


cd /non-vol/docsis
enable bpi false
write
cd /
reset

then press enter and reboot

 

[rizlafoxy54321]

thanx

thanx a lot m8 that done the trick im finaly online with this mod thanx to you 1s again thanx m8

hi m8, Security Enabled BPI needs to be disable login in hyperterminal then do the stop scan command

Code:
cd \cm_hal
scan_stop
cd \

then enter then copy and paste the command below


cd /non-vol/docsis
enable bpi false
write
cd /reset


then press enter and reboot

 

[gentlex]

glad ur sorted m8

 

[gentlex]

hi m8 after taking another looking @ ur status i notice ur config file is cmreg-ntlhm120-light.cm which is if im corrrect is 2mb so u will need to force it to a to 10mb cfg but before u do that u will need ur tftp server ip address which u can find by fellowing this mini tut on the link below then u can use the 250configurator to force it the 10mb cfg

http://www.digitalworldz.co.uk/forums/showthread.php?t=124434