scrambled channels cccam

[lalalala]

hello,
i have installed 750p for 6900hd ( i have tested a lot Patches) and
for me Sky deutschland HD scrambled channels every 5 or 10 minutes and come back
Bis france channels same
Tnt sd same but we now it
Have you the same with other Patch?
Thx for your answers.

 

[holmroad]

hello,
i have installed 750p for 6900hd ( i have tested a lot Patches) and
for me Sky deutschland HD scrambled channels every 5 or 10 minutes and come back
Bis france channels same
Tnt sd same but we now it
Have you the same with other Patch?
Thx for your answers.

Are you absolutely CERTAIN its not your server which may be the problem mate, because those channels have been fine for ME on 750P on TM6900HD Super, its only the PLTV HD on 10E jerkiness/audio poor sync & the PVR recording probs which still wrangle with ME - hence I'm now back on 'safe' patch 726P until we get 751P!:Biggrin2:

 

[xxxxxx]

hello,
i have installed 750p for 6900hd ( i have tested a lot Patches) and
for me Sky deutschland HD scrambled channels every 5 or 10 minutes and come back
Bis france channels same
Tnt sd same but we now it
Have you the same with other Patch?
Thx for your answers.

Hi m8

Technomates selects by default AUTO. So if you select the correct pid avoiding freezing
make sure to set the ecm pids too this helps to reduce freezes and glitching

1) press the Mute
2) then press the Exit
3) then press the Blue button
4) you will then see the Viaccess 032830
5) and select Viaccess 032830
6) press OK on Viaccess 032830
7) Settings were changed Do you want to save > press yes
8) press Exit

you have to do this for every channel on Canal + France SD HD Tnt SD HD

It works ok on CCcam no freez m8


on Sky deutschland HD will have to go back in the ecm pid menu and select one that is working with your server. select one > ( Nagravision (1833/1834/1861) > ( NDS (9C4/9C7/9AF/98C)


it can be as willu server using Hop2 Hop3 dont like it TM freezes m8. or it can be ping on server which may be the problem m8

 

[xxxxxx]

hello,
i have installed 750p for 6900hd ( i have tested a lot Patches) and
for me Sky deutschland HD scrambled channels every 5 or 10 minutes and come back
Bis france channels same
Tnt sd same but we now it
Have you the same with other Patch?
Thx for your answers.

are you using Dragon/T-Rex/Diablo cams take it out on TM6900 prone to poor HD channel opening on CCcam

 

[holmroad]

are you using Dragon/T-Rex/Diablo cams take it out on TM6900 prone to poor HD channel opening on CCcam

Yes thats exactly what I found too a few weeks ago as it had been so long since I'd had my Dragon cam inserted I'd forgotten how much it had impacted on other things, especially HD channels!:Biggrin2:

 

[lalalala]

i have only cccam
i tested with tntsat sd with channel Tmc and nothing change ,every 3 seconds freeze

 

[xxxxxx]

i have only cccam
i tested with tntsat sd with channel Tmc and nothing change ,every 3 seconds freeze

did you try Patch726p m8. if it dones freeze on Patch726p. it from the server side because here it is working fine

if you wont to send me a PM till me with server you are useing and I will ask him for a test to check it out for you on my side

anyway all the HD channels on 19.2e Arte HD, Penthouse HD, M6 HD, W9 HD, Ushuaia HD, France 2 HD, Blackbelt HD, TCM HD, 13EME RUE HD, CANAL+ CINEMA HD, CANAL+ FAMILY HD, and more. blocked on CS at the monment channels thru Viaccess with new nano. hope there will be somes fix for it. all the SD channels are still working fine at the monment

 

[MartyMacfly]

Hi m8

Technomates selects by default AUTO. So if you select the correct pid avoiding freezing
make sure to set the ecm pids too this helps to reduce freezes and glitching

1) press the Mute
2) then press the Exit
3) then press the Blue button
4) you will then see the Viaccess 032830
5) and select Viaccess 032830
6) press OK on Viaccess 032830
7) Settings were changed Do you want to save > press yes
8) press Exit

Hi XXXXXX
Which viaccess pid do I need to select for Bis on 13e. I too have some freezes and if this could help that would be great. Thank you.

 

[xxxxxx]

Hi XXXXXX
Which viaccess pid do I need to select for Bis on 13e. I too have some freezes and if this could help that would be great. Thank you.

Hi MartyMacfly m8

select Viaccess 042800 on Bis 13e.

 

[lalalala]

i tried your suggestion and it seems to go better now.i tested it this week.
thx

 

[MartyMacfly]

where can I get all the info in regards to what encryption system and ecm works with the package/TV provider

ie: Viaccess 042800 on Bis 13e
what is it for let's say sly italia or sct or nova cinema...
where can I get this info so I can select the ecm pid I need if there are several
Thank in advance.
By the way XXXXXX, your advice on bis 13e works a treat.

Hi MartyMacfly m8

select Viaccess 042800 on Bis 13e.

 

[thijss26]

this all depends on who you are getting the shares off what cards they are using ,if there is more then one ecm pid you will have to test wich one works best with the server you are using once you know the ecm pid of 1 channel then the others of that provider should be the same.

 

[xxxxxx]

this is hard to tell tou about it m8 beacouse really you have to ask your server to tell you what cards he is using

this is a good idear for TM non LINUX

beacouse if you know your server what card he is using you can select card dierect on TM and you can avoyed the TM searching the witch card the server is using.

but just to remind you if its the server over to loaded with people or he has a very high pin on his internet then you will get glitching and frezzing

i can tell you what most of them are using

on TM you can select for these packages m8
for sly italia SD + HD select NDS (9CD)
for nova SD select IRDETO (604)
for Digiturk SD select Cryptoworks (D00)
for C+NL 23.5East Nagravision (1817)