Hi again dunn3,
This is the procedure I have always used... everyone's will be slightly different...
NB: I have tried to make this 'How to' as detailed as I possibly can... and as basic as I possibly can...
Download Latest Original Technomate Software file to PC from...
Download Latest Phantompatch Software file to PC from...
Download center
Download ADDON_002p Software file to PC from...
Download center
Download Latest TMSoftcam Keyfile to PC from...
https://www.digitalworldz.co.uk/index.php?threads/253293/
Insert USB flash drive into PC
Load Latest Original Technomate Software file from PC to USB flash drive
Load Latest Phantompatch Software file from PC to USB flash drive
Load ADDON_002p Software file from PC to USB flash drive
Load Latest TMSoftcam Keyfile from PC to USB flash drive
Insert USB flash drive into the TM 5402 HD
Enter Menu > select 'USB' > 'Data Transfer' > Press 'Red' button to 'Upload Channel Data' (aka .cndf file)
Check .cndf file (channels/satellites) is now on the USB flash drive 'File List' then press 'Exit' once
NB: It is recommended that you keep a copy of the latest .cndf file on your PC at all times and update it regularly!!
Go to 'System Settings' > 'Factory Reset' > PIN: 0-0-0-0 > 'Factory Reset' > Select 'Yes'
Wait until the factory reset has finished then select your preferred language on the following screen
Go to 'USB' > 'Data Transfer' > and select the Latest Original Technomate Software file from the 'File List'
Wait until the Latest Original Technomate Software has finished loading and wait until the receiver re-boots
Go to 'System Settings' > 'Factory Reset' > PIN: 0-0-0-0 > 'Factory Reset' > Select 'Yes'
Wait until the factory reset has finished then select your preferred language on the following screen
Go to 'USB' > 'Data Transfer' > and select the Latest Phantompatch Software file from the 'File List'
Wait until the Latest Phantompatch Software has finished loading and wait until the receiver re-boots
Go to 'System Settings' > 'Factory Reset' > PIN: 0-0-0-0 > 'Factory Reset' > Select 'Yes'
Wait until the factory reset has finished then select your preferred language on the following screen
Go to 'USB' > 'Data Transfer' > and select the ADDON_002p Software file from the 'File List'
Wait until the the ADDON_002p Software has finished loading and wait until the receiver re-boots
Go to 'System Settings' > 'Factory Reset' > PIN: 0-0-0-0 > 'Factory Reset' > Select 'Yes'
Wait until the factory reset has finished then select your preferred language on the following screen
Go to 'USB' > 'Data Transfer' > and select the .cndf file (channels/satellites) from the 'File List'
Select 'Normal DB' then wait until the the .cndf file (channels/satellites) has finished loading (the receiver will not re-boot)
Go to 'USB' > 'Data Transfer' > and select the .cndf file (channels/satellites) from the 'File List'
Select 'Default DB' then wait until the the .cndf file (channels/satellites) has finished loading (the receiver will not re-boot)
Go to 'USB' > 'Data Transfer' > and select the Latest TMSoftcam Keyfile from the 'File List'
Wait until the the Latest TMSoftcam Keyfile has finished loading (the receiver will not re-boot)
Go to 'System Settings' > re-set 'Time/Date Settings' (if applicable) then 'Save' > re-set 'A/V Output Settings' then 'Save' > re-set 'OSD Settings' then 'Save' > re-set 'Front Display Settings' then 'Save' > re-set 'Password Settings' (if applicable) PIN: 0-0-0-0 > alter personal preferences then 'Save'
Exit menu and press 'Sat' on remote control and select the satellite you were on before the patching procedure...
N.B.
Patch can be switched ON/OFF in the Menu by selecting 'System Settings' and pressing 2-0-0-4 on the remote
CAS Menu can be accessed (when on a TV/Radio channel) by pressing 'Mute' then 'Exit' on the remote
BISS Menu can be accessed (when on a BISS TV/Radio channel) by pressing 8-2-8-0 on the remote
I hope this helps...
Best Wishes,
Zorch