TM-800 UR-19-09-2010 Released

[VectorZ]

also make sure you haven't got some kind of MAC address filtering enabled on your router, or if you have, add your wifi cards MAC address... I'd take the lid off and look at the sticker on the card rather than truse what is reported on image as pretty sure it only shows integrated cards address

 

[forrest1066]

so are UR going to do anything about releasing a new update as this one clearly doesnt work for alot of us???

 

[fdlsys]

Apparently, they are still on schedule for the end of this week, as promissed.
What good comes out of it is another story...

 

[forrest1066]

lets just hope this new image actually works for SD and HD recording then

 

[jsaw]

also make sure you haven't got some kind of MAC address filtering enabled on your router, or if you have, add your wifi cards MAC address... I'd take the lid off and look at the sticker on the card rather than truse what is reported on image as pretty sure it only shows integrated cards address

Thanks for the input, i disabled MAC address filtering when i set up the router.At the moment i am reflashing latest image.

roud:roud:roud:

 

[jsaw]

Everything seems to be correct apart from the encryption, all tests show i am connected but the wireless light on my router is blinking orange when it should show steady blue.Just reflashed and scanning satellites, will have one last attempt to configure the wifi.


Wifi now working but only at a bit rate of 54Mbp/s, cannot connect via dcc had to go back to wired for that.Now ccam seems to be out of sorts.Happy days


All sorted, ccam now working (required 3 restarts).Sorted dcc, router assigns a different ip address to wireless network.Disappointed at the bitrate my router broadcasts at up to 300Mb/s , it seems to me the wireless network card is either 820b or g and not n unless anyone knows differently.

 

[Rat]

is this on HD channel(s) mate Ive not checked all HD channels but I'm deffo getting this issue on BBCHD
exact same as you programme audio is fine cuts to a BBCHD advert/programme preview and no sound
next programme starts,audio is fine again :err:

anyone else ?

Any one having any audio issues ?

I am watching Eng v Pak and sound is fine, switch to adverts and no sound.Back to game and sound ok.Can get sound back in adverts by audio button but then sound goes when switching back to game.Didnt have this issue last night after first loading image
:Cheers:

 

[galonki]

I have definately noticed this aswell guys with the latest image,

1. watching a channel not payed attention whether sd or hd but the sound will just dissapear after a while for no reason, and clicking audio and english does not sort it out, only option is to restart box.

2. also, on the positive side, if i go on a channel and there is no sound (almost always the case for sly mtv channels) clicking audio and english turns audio on instantly rather than having to wait like 5sec as in previous images.

can anyone confirm to experience the above 2 aswell.

 

[Rat]

if you go to
menu
setup
system
av settings
AC3 defult = Yes

you shouldent get much audio problems,dosent fix the problem I posted above though lol

 

[jsaw]

is this on HD channel(s) mate Ive not checked all HD channels but I'm deffo getting this issue on BBCHD
exact same as you programme audio is fine cuts to a BBCHD advert/programme preview and no sound
next programme starts,audio is fine again :err:

anyone else ?

Yes i was watching in HD, since reflashing today i havent noticed any audio issue but havent checked too many channels.Certainly not happening on the channel currently being watched ( Good Food HD)


roud:roud:roud:

 

[forrest1066]

are UR releasing another image this week?? or will it be a while. Really Really need a fix for the recording problem??

 

[bassethound]

I have a audio problem when i installed this image today no sound through the hdmi lead every things fine with scart lead strange?

Re-flashed several times and done factory reset no joy getting audio over hdmi switched back to the TM800HD modified backup image 29-08-10 every thing working fine sound is perfect?

 

[belmando]

Strange that i never need it to do so on previous images!only the latest 1 i get remote problem(its the same remote in set up wizard!).But thats not a big problem only 5 hits on exit button on the recievers front buttons!My worry is ,shall we ever be able to upgrade frontprocessor to 1.0.1?Mine is old one? without fun,i use a notebook cooler so it never gets hot.

i fladhed mine with 15.0710 image first then with latest 1 ,No remote issue this time but AUDIO does not work!This time i flashed as usual ,no factory reset ,NO extra minutes after switching of reciever!I dont believe in such a procudure since i never used it on any Enigma based reciever(well execpt in beginning av db7000 era when dream up was the only way)Mini web or usb method should take care of erasing and flashing the box.But problem is new release does not update my front processor from 1.0.0 to 1.0.1!shit,is my main board is not compatible for next releases?:sad::

BTW;

Where is this UR member?

 

[eazi]

I lose sound when it switches to adverts and if I ignore it, the box freezes seconds later.

If I choose audio and press OK, sound works for ads I have to repeat when program re-starts

 

[Rat]

I lose sound when it switches to adverts and if I ignore it, the box freezes seconds later.

If I choose audio and press OK, sound works for ads I have to repeat when program re-starts

that exactly what happens to me on HD channels But mine dont freeze

 

[forrest1066]

any update on a new image yet to solve the wonderfully stable media player the box has got roud:roud:

 

[sargie]

any update on a new image yet to solve the wonderfully stable media player the box has got roud:roud:

dont use the media player use the "list" button instead.

 

[forrest1066]

dont use the media player use the "list" button instead.

i do and the thing locks up after 5 seconds of playing anything

 

[sargie]

i do and the thing locks up after 5 seconds of playing anything

Oh well youll have to wait then

 

[forrest1066]

waiting being the main word roud: