Working 100% : CCcam+Gbox with SSSP on Technomate 1000/5000/6000 Series

hi mange to get far i am not getting any thing elss am i missing some thing it's first time for me
i using TM1600ci
[1/6/2010-12:47:34 PM] - Abriendo Puerto:
[1/6/2010-12:47:44 PM] - Abriendo Puerto:
[1/6/2010-12:47:44 PM] - Protocolo: SSSP
[1/6/2010-12:47:44 PM] - Lista de canales OFF
[1/6/2010-12:47:44 PM] - Control Remote OFF

[1/6/2010-12:53:47 PM] - Closing port:

[1/6/2010-12:54:02 PM] - Opening port:
[1/6/2010-12:54:02 PM] - Protocol: SSSP
[1/6/2010-12:54:02 PM] - Channel List OFF
[1/6/2010-12:54:02 PM] - Remote Control OFF
 
Last edited:
on my 6900super+ i had to use a patched firmware. this gives you an option to turn sssp on the recevier.

you have to make sure that sssp is configured on the box too to use this.

im trying this on my box as cccam via ethernet is quite poor. im finding im getting a stutter every 5 seconds or so using this method (remote cccam server hosting sly uk). is there a way of tweaking the settings to get it more stable??

ta
andy
 
Last edited:
Does any one have patch for tm1600 2ci to use sssp and how???
I am new to this i only been using my tm for footy.
Thanks in advance
 
paimai said:
hey guys, this seems like some awesome stuff, sorry im a noob and mainly used the technomate 1500ci+ with darkmans patch to watch saturday football 3pm kick offs. but for a long time have not done so.

anyway more to the point, with the card sharing utility, if i configure everything ok, can i get sky uk working?

thanks in advance
paimai

p.s my bad i just read the sticky post regarding card sharing which says it works on 6800/6900 models at the top of this forum, does that mean my techno 1500ci+ will not work? im confused as this thread says the 1000 series
Click to expand...

I can confirm its working on both the 1500CI+ & 5400CI+. It should work on any Technomate receiver including 3000 & 6000 series which has sssp enabled via the patch.

You will get sky UK 100% freeze free if you have a good cccam sever.
 
theroth said:
on my 6900super+ i had to use a patched firmware. this gives you an option to turn sssp on the recevier.

you have to make sure that sssp is configured on the box too to use this.

im trying this on my box as cccam via ethernet is quite poor. im finding im getting a stutter every 5 seconds or so using this method (remote cccam server hosting sly uk). is there a way of tweaking the settings to get it more stable??

ta
andy
Click to expand...

At the moment cccam isn't stable on the 6000 super models using the ethernet port. You are better off using the sssp method until its sorted.
 
702p and ethernet cccam isnt too bad this method is fine for an hour or so then i have to reset the ethernet/cccam which is very annoying.

anyone got any tips so i can use sssp without it freezing every 5 seconds?

ta
theroth
 
hey dig and sak! thanks for ur replies!

so im going to patch my techno 1500ci+ with the latest patch that has ssp enabled? am i right in thinking its the one on the bottom of this page

http://www.digitalworldz.co.uk/downloads-technomate-tm-1000-tm-50.html

titled: tm 1000 series 304 patches 17/9/09 - 1500CI+_1000CI_304p_17-09-2009.zip

just wondering if this is the correct patch for my 1500ci+ box,

thanks in advance guys!
 
Last edited by a moderator:
paimai said:
hey dig and sak! thanks for ur replies!

so im going to patch my techno 1500ci+ with the latest patch that has ssp enabled? am i right in thinking its the one on the bottom of this page

http://www.digitalworldz.co.uk/downloads-technomate-tm-1000-tm-50.html

titled: tm 1000 series 304 patches 17/9/09 - 1500CI+_1000CI_304p_17-09-2009.zip

just wondering if this is the correct patch for my 1500ci+ box,

thanks in advance guys!
Click to expand...

The 17/09/09 was the last patch and has sssp enabled.

Mate don't post links to other forums the last patch for the 1000 series was posted on this forum.

https://www.digitalworldz.co.uk/posts/1604464/
 
Last edited by a moderator:
sakiblateef said:
The 17/09/09 was the last patch and has sssp enabled.

Mate don't post links to other forums the last patch for the 1000 series was posted on this forum.

https://www.digitalworldz.co.uk/posts/1604464/
Click to expand...

im sorry, please forgive me for posting links to another forum, i should know better :(

thanks for your prompt reply dude, so once i patch my techno, with the sssp enabled patch is there anything i need to configure on my technomate before i patch the techno with hdvb cccam config holding my server details?

also mate could you tell me which usb to rs32 converter you used as some are really bad.

thanks alot mate
 
Last edited by a moderator:
No worries mate.

Theres no need to configure the Technomate mate after flashing the patch just need to configure the software so that its running on the correct comport etc as per the tutorial.

As for usb to r232 any cable will do the one I have requires drivers for it to work so they may come with a driver. Digi did do a guide on how to setup one sucessfully it should be knocking around the forum somewhere.
 
when am try to tick active CCcam it crashes any infor y
#
can anyone confirm that when we load patches in TM do we use nulmodm or st rs32 0nly cable
thanks
 
Last edited:
then the cable is ok iam using nullmodem to usb it works fine with darkman patch !! i must be missing some thing

on statas i m geting nothing
 
Are you sure you have the correct settings for the config of the comport ?
SPEED : 115000
DELAY : 1000
CLICK OPEN PORT ( you can only use COM1/COM2/COM3/COM4)

You can change this mostly within WINDOWS if your port is highter than 4, (Device Manager COm ports)

You should first enable the CCcam and/or Gboxserver before opening your port
Sometimes you need to switch channels with Technomate in order to activate SSSP
 
Last edited:
on gbox i am getting

[4:49:19 PM] Starting Gbox...
[4:49:19 PM] Checking the connection status NetWork
[4:49:19 PM] Connection Status OK Connected to: LAN network
[4:49:19 PM] Loading cwshare.cfg ...
[4:49:20 PM] [gbox] Trying to connect online, please wait ...
[4:49:20 PM] My IP 69.65.19.125 ID 6622 (HDVB.no-ip.org) pass 44332211, are in line
[4:49:22 PM] IP 000.000.000.000 Port 2773-24000 ID 2266 pass 11223344 sharelevel 2/2 (HDVB.dyndns.org)
 
hey guys, ive patched my techno with the latest 1500ci+ patch with sssp enabled! before i look into hdvb im having trouble finding cardshare servers. im only a noob and want to learn, in my current scanning of forums, i see alot of people asking for C lines? posts such as send me your c line and ill send you mine? can anyone explain what that might be? do i need a cline in order to get a free cardshare server? thanks in advance.

Please feel free to PM me
 
Last edited:
"Statas" is only for CCcam clients !
You need to click on the Tab Gbox and the log to watch what is happening
"
P 000.000.000.000 Port 2773-24000 ID 2266 pass 11223344 sharelevel 2/2 (HDVB.dyndns.org)
"

Sam, you need to configure you cwshare.cfg


You have to create a Dynamic Domain ( go to Dyndns.com and create a dynamic domain like : sam786.dyndns.org)
You need to configure the dyndns client so you'r Ip keeps updating with sam786.dyndns.org dynamic domain.

You have a router at home which need to be forwarding UDP internally towards your gbox running on yr pc/laptop. Depening on the GBOX port settings you created in cwshare.cfg. In this case Port 6969.

cwshare/cfg example :

#Gbox cwshare.cfg
#My Gbox identification + pass
M: { sam786.dyndns.org { 243322A1 }

#The Gbox line you have to give to the other party
#D: { sam786.dyndns.org { XXXX 6969 { 243322A1 { 02 02 }}}}

#The gbox line you got from someone
# Syntax :
# D: { gboxsrv { MyPort Hisgboxsrvport { His_passw { 03 03 }}}}

D: { gboxserver.dyndns.org { 6969 6000 { BAAHED88 { 03 03 }}}}

I: { 03 }
x: { 10 }
 
Last edited:
hey wolftje, thanks for your reply, i dont have a dreambox to test anything :( so will i be stuck with my technomate 1500ci+ if i dont have a dreambox to test it on?

i would appreciate any help, ive got a good pc and a good internet connection so i dont mind swapping or sharing but i need to get my hands on something to share/test first

please help :(
 
You must log in or register to reply here.

Similar threads

wolftje
VIAACCESS HotBird 13E : SCT XXX , HOWTO WATCH WITH SSSP on TM1000/5000/6000 Series
Replies
10
Views
13K
db49er
D
Back
Top