segel
Inactive User
- Joined
- Jan 10, 2011
- Messages
- 613
- Reaction score
- 146
I'm looking through my manual page 63, and it has a setup sequence for TV settings.
1. TV setting
Set-up Sequence: <<1 + 3>>, <4digit brand-code>, <<Mute or Power>>
1. Press number 1and 3 for three seconds until LED is on.
2. Find your TV brand-code from the TV code list and insert 4 digit code.
- If you press “0000”, Full Automatic Scan will start. This will take a while.
3. Keep pressing Mute button (or Power) until your TV is muted (or turned off)
4. If your TV is muted (or turned off), stop pressing Mute button.
5. Now, your RCU is in test mode and press Volume + /- to check if your TV responds.
6. If the volume buttons are operational, Press <OK + STOP ( )> to escape from the set-up mode
I have no LED on my Duo remote but continue with sequence and when Duo reboots after holding the power button, I test the volume buttons to see if TV responds.... Duo volume (Not TV volume) is operational so press <OK + STOP>.
Does the guide mean, that when you test, when RCU is meant to be in test mode, by pressing volume, if I get a response which I always do, then remote is tuned/done regardless of time spent searching tuning as soon as the Duo reboots I press volume straight away and it's operational, I must being doing something wrong as control doesn't seam to have tuned to the TV to me.
Can anyone offer some input here?
Cheers,
1. TV setting
Set-up Sequence: <<1 + 3>>, <4digit brand-code>, <<Mute or Power>>
1. Press number 1and 3 for three seconds until LED is on.
2. Find your TV brand-code from the TV code list and insert 4 digit code.
- If you press “0000”, Full Automatic Scan will start. This will take a while.
3. Keep pressing Mute button (or Power) until your TV is muted (or turned off)
4. If your TV is muted (or turned off), stop pressing Mute button.
5. Now, your RCU is in test mode and press Volume + /- to check if your TV responds.
6. If the volume buttons are operational, Press <OK + STOP ( )> to escape from the set-up mode
I have no LED on my Duo remote but continue with sequence and when Duo reboots after holding the power button, I test the volume buttons to see if TV responds.... Duo volume (Not TV volume) is operational so press <OK + STOP>.
Does the guide mean, that when you test, when RCU is meant to be in test mode, by pressing volume, if I get a response which I always do, then remote is tuned/done regardless of time spent searching tuning as soon as the Duo reboots I press volume straight away and it's operational, I must being doing something wrong as control doesn't seam to have tuned to the TV to me.
Can anyone offer some input here?
Cheers,