VM Card Sharing.

[Parad0x]

Yes they do.

 

[red devil]

yep, thats a couple of months old..........and that one is still workin fine :Clap:

 

[geforcefx]

very intersting !:Clap:

 

[despdan]

rom 142 in ireland...........
Am helping another member here & have his upc n3 card working in the dreambox using rqcs:
Opening sci... Done
Detecting card... Card present
root@dm500 ~ # Resetting card... Done
Identifying card type...
Historical bytes: D N A S P 1 4 2 R e v G 0 2
44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32
Card type: Nagra
ROM Revision: 142
EEPROM Revision: RevG02
Configuring sci...
SCI | f: 3574595 | T: 1 | ETU: 32 | EGT: 1 | CWT: 25 | BWT: 89291 | WWT: 0
Slot custom parameters:
des_key: 0102030405060708091011121314
box_key: ################
dt06_key_0d:
cam_n: ######################## ...
Long parameter, first 32 characters shown, 128 total.
secondary_key:
rsa_key:
Card start-up initialization...
Using Plain CAM N session negotiation method:
Setting Field Size: Done
Retrieving IRD serial number: ########
Retrieving CAM serial number: ########
Retrieving System IDs: 5F01,5F02
Retrieving CAM challenge data: Done
Performing Session Key Negotiation: Successful
Starting card worker thread... Done
Starting protocol server on port 10000 [newcamd protocol]
Logical Slot 'Lower' READY!
------------------------------------------------------------------------------
Starting Logical Slot 'Upper' [Users: 1]
------------------------------------------------------------------------------
Device Path: /dev/sci1 | Listening Port: 10000
------------------------------------------------------------------------------

So going by that its reading the card ok, Now i have tried a couple of emu's but not having much luck the best has been mgcamd: just to let ye guys no irish guys have rom 142 working in dream.

You could be getting a false positive form the above, double check that you have edited the config file correctly. I've managed to get the above with wrong keys.

As Red Devil says we have had this working for the last couple of months now

 

[red devil]

.....................

 

[hajj_3]

Hi guys, I have a V+ Box and an XL subscription, is it possible to put my card in my Abcom IPbox 900c and read the card details off and enter it into a cam or something so i can get the same channels on that box too?

I want to be able to record to esata hdd and transfer recordings to my pc and remove adverts which is 1 of the main reasons i have it.

I'm in a Nagra3 area, switched to Nagra3 about 1 week ago, now i don't get all the channels on it, only the free to air ones

Anyone know?

 

[nozzer]

At this point in time, no, not possible !

 

[kegnkiwi]

At this point in time, no, not possible !

I think is is quite possible, ie starview hd combo, starview 6 and kryptoview box's. I thinks its a matter of those in the know ie those above, release which cam they use to read the card and how they go the box key,roud:

 

[hackmax]

I think is is quite possible, ie starview hd combo, starview 6 and kryptoview box's. I thinks its a matter of those in the know ie those above, release which cam they use to read the card and how they go the box key,roud:

or of course, those below to put some effort in and work it out for themselves.