urgent help

storey999

Inactive User
Joined
Mar 30, 2005
Messages
93
Likes
0
#1
i bought a dbox sagem x2 intel

and when i received it i flashed sportster on it but when it is rebooted it wont boot properly stays on loading kernal and goes nowhere else then turns onto to standardbyb after 15 seconds i have tried sportster
yadi boxcracker nextgen the only 1 i have had able to boot was the yadi 1 but as soon as i put the ucodes in through ftp it wont boot again and i know all the images are not corrupt as they work on my other box
in anyways had a friend look at it

and i think he has tryed to re debug it as now when i try to flash with ifa
it goes through the backup process then hangs on erasing 0020000 then says low voltage then it stops

what can i do about this
 
S

Speedy2206

Guest
#2
You'll have to ask MGB on this one... he seems to have a good knowledge of these boxes on the electronics side of things and can tell you whether something is faulty.

It does sound like the box may be knackered, but you will still be able to boot up an image from your hard drive (i.e.. without flashing it to the box first.. runs directly from your HDD).

So there is still hope! :)
 

storey999

Inactive User
Joined
Mar 30, 2005
Messages
93
Likes
0
#4
re help

here is the log mate


Size: 8192 kB in 71 Sectors

Using SCC ETHERNET device
TFTP from server 192.168.1.5; our IP address is 192.168.1.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
####################
done
Bytes transferred = 763552 (ba6a0 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763488 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK


















dbox2 - ImageFlashingAssistent

- Hallenberg.com -

Wilkommen auf ihrer dbox2


Starte Backup....
Schreibe Backup: 8064k von 8064k (100%)
Backup abgeschlossen!
Der Flashprozess wird nun gestartet...

While erasing blocks 0x00000000-0x00020000 on /dev/mtd/4: Input/output error
Flashen beendet!

Sie koennen die dbox jetzt ausschalten.


Please press Enter to activate this console.
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: SiS 900-Based PCI Fast Ethernet Adapter - Packet Scheduler Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.1.5
IP-Adresse die die dbox bekommt: 192.168.1.202
Comport: Communications Port (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Sempron(tm) 2200+ @ 1517 MHz
Dateiname des Images: 200505261551_neutrino_yadi_squashfs_head_2x.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
------ Powered by http://www.dboxservice-hallenberg.de ------
 

mgb

Inactive User
Joined
May 9, 2005
Messages
3,939
Likes
29
#7
While erasing blocks 0x00000000-0x00020000 on /dev/mtd/4: Input/output error
Something is wrong with the flash chips.
You should get also an error message after the erase command with the older IFA version.
 

storey999

Inactive User
Joined
Mar 30, 2005
Messages
93
Likes
0
#9
pl;ease help

here is a log we will all understand hopefully


d€³debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.5, My IP 192.168.1.202
debug: Sending TFTP-request for file C/ppcboot63259/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3b-e9-36
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.202
Filename 'C/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.202
Filename 'C/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *#################
Abort
FB logo not found
Input: serial
Output: serial

Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected

dbox2-ppcboot> bootp 120000 /tftpboot/flash.img

BOOTP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *#############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
done

dbox2-ppcboot> protect off 10020000 107FFFFF

...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107FFFFF

Erase Flash from 0x10020000 to 0x107fffff

sector 4 ....
sector 5 ....
sector 6 ....
sector 7 ....
sector 8 ....
sector 9 ....
sector 10 ....
sector 11 ....
sector 12 ....
sector 13 ....
sector 14 ....
sector 15 ....
sector 16 ....
sector 17 ....
sector 18 ....
sector 19 ....
sector 20 ....
sector 21 ....
sector 22 ....
sector 23 ....
sector 24 ....
sector 25 ....
sector 26 ....
sector 27 ....
sector 28 ....
sector 29 ....
sector 30 ....
sector 31 ....
sector 32 ....
sector 33 ....
sector 34 ....
sector 35 ....
sector 36 ....
sector 37 ....
sector 38 ....
sector 39 ....
sector 40 ....
sector 41 ....
sector 42 ....
sector 43 ....
sector 44 ....
sector 45 ....
sector 46 ....
sector 47 ....
sector 48 ....
sector 49 ....
sector 50 ....
sector 51 ....
sector 52 ....
sector 53 ....
sector 54 ....
sector 55 ....
sector 56 ....
sector 57 ....
sector 58 ....
sector 59 ....
sector 60 ....
sector 61 ....
sector 62 ....
sector 63 ....
sector 64 ....
sector 65 ....
sector 66 ....erase failed: a800a8
done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000

Copy to Flash... Flash not Erased

dbox2-ppcboot>
------ Systeminformations ------
Selected networkdevice: SiS 900-Based PCI Fast Ethernet Adapter - Packet Scheduler Miniport (0)
IP-address of the networkdevice: 192.168.1.5
IP-address which the dbox gets: 192.168.1.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
------ Powered by http://www.dboxservice-hallenberg.de ------
 

mgb

Inactive User
Joined
May 9, 2005
Messages
3,939
Likes
29
#10
Flash chip faulty or one of the connection lines around the flash chip is broken.
 
TEST
Top