tm500 super cccam

[jadejackellie]

hi lads my mates tm500 cline has expired and the guy who normaly
enters the lines for at a cost,but now he is chargin 250 wich my mate
thinks is to expensive,so im going to try and do it for him,ive got a spiderbox
wich i can easily enter lines onto,but ive noexperience of doing a tm500 super
could anyone tell me if theres an idiots guide to follow anywere,will i just need to
put a new line in or will i have to update his software aswell,thanks in advance

jeff

 

[Abu Baniaz]

Option A. Download an ftp client. I find Filezilla easy to use. You will need to edit CCcam.cfg located in /var/etc/

Option B. use miniweb. Credits to the author

Mini-Web allows you to quickly install images/software to your Technomate receiver without knowing the IP Address, by your PC. You can also edit CCcam and NewCamd config files and backup/restore your channel list.

1. Turn the AC Power OFF. Press and hold the Power Button on the Front Panel and at the same time, turn the AC Power ON (whilst still holding the Power Button). You have to keep holding the Power Button until 3 numbers are shown on the Front Panel’s Display.
2. These numbers are the last 3 numbers of the IP Address of the receiver. For example, if the last 3 numbers shown are ‘164’, then the IP Address will be: 192.168.1.164 or 192.168.0.164 depending on your router’s default first 7 numbers
3. Now enter the IP Address into your Internet Browser as below:

http://192.168.1.164
4. After typing in the IP address, press Enter on your keyboard. The following screen will be displayed:
I can not copy/paste jpeg images so I have to take it from my box mini-web:
"This page guides you in your easy upgrade of the receiver.
Unless you interrupted the process, this means that you don't have any valid operating system in flash.
You can upgrade the receiver with the latest firmware easily under the below section.
Upgrade FIRMWARE of your Receiver ==>
Select FILE :
Edit Emul config
CCcam Edit ( Click ) <==== Click it to edit by yourself. /var/etc/CCcam.cfg
Mgcamd Edit ( Click ) <==== Clink it to edit by yourself. /var/keys/newcamd.list
NewCS Edit for only BoxKey and RSA ( Click ) <==== Click it to edit by yourself. /var/tuxbox/config/newcs.xml
Camd3 Edit ( Click ) <==== Click it to edit by yourself. /var/keys/camd3.config

Backup/Restore(Services and Bouquet)
Backup ( Click ) <==== Clink it to edit by yourself. Backup Files in Receiver
Restore (Select FILE) Restore Files to Receiver "

6. Click on the ‘Download' button to start the update.

 

[jadejackellie]

oh my word if thats the idiots guide i might aswel
give up now sounds extremely difficult
i didnt realise i had to connect the reciever to
a computer,what kind of cable would i need to use to connect
it to my laptop,i was hoping it would be as easy
as doing a spiderbox wich seems to be so much easier
thanks for reply mate much appreciated


jeff

 

[Abu Baniaz]

Which option do you want to take?

Your satellite receiver is connected to your broadband router. Yourr laptop/PC is also connected to your router. They can communicate to each other. You do not need any other cables. It is very easy.

I have just re-read what I pasted. You only need to stop at edit CCAM. Forget everything below that line.

 

[jadejackellie]

so were it says Mgcamd Edit and below i dont need to
do any of that,im not sure wich option to use mate starting
to think im out of my depth

 

[Abu Baniaz]

Yes, you want to click edit CCcam.cfg

 

[jadejackellie]

abu,oh my god i followed your instructions
and it actuslly worked,im chuffed with myself
i couldnt have done it wighout your help
so a big fat thankyou to you mate,thanks again

jeff

 

[meet20009]

Sorry but what part of the CCcam.cfg do you edit?

 

[mdt]

Sorry but what part of the CCcam.cfg do you edit?

if your using it as i client then remove everything and enter your details,save exit and restart cam,regards mdt

 

[meet20009]

When u say details what do I add

 

[mdt]

your connection details. eg. ip address of your provider. regards mdt

 

[slyboxhd]

Yes, you want to click edit CCcam.cfg

hello
Abu

could you till me how to restart the cam on this box, cheers

 

[slyboxhd]

hello
Abu

could you till me how to restart the cam on this box, cheers

its ok i remembered that you use the blue botton lmao :eh?:

 

[theblueirish]

Rebooting the box will restart the cam or you can go to blue panel and do it from there.