Slight probs - motorised install??

gooner71

VIP Member
VIP Member
Joined
Mar 29, 2005
Messages
1,912
Reaction score
115
Just stuck up my 110cm dish on a diseqc motor - didnt have a decent bracket so ive imporvised with an old sky analogue thing with a u shaped pole!! Anyway after a lot of messing about ive got it working on 1w - 7w - 13E but if i go to 28E or 19E its wont lock - it looks like im getting no signal??

From what ive read it looks like my problem could be that the bracket is not 100 percent straight (quite possible) - just thought it a bit strange that it clears 13E but not 19E. I set it up on 1W so getting 7W didnt suprise me as its so close but to get 13 and not 18 or 28 is puzzling me!!!??
 

crofty05

Inactive User
Joined
Jun 17, 2007
Messages
377
Reaction score
3
Location
ireland
ye m8 its your bracket what i would do is take it of spend as much time as needed to level the pole when your sure go ahead and set the dish m8
 

telewestTUM

Inactive User
Joined
Jun 25, 2007
Messages
1,286
Reaction score
38
Location
North East
Yeah id say its the bracket / wall mount too

you can pick a one up for pretty cheap T and K or L shaped. then there is the more expensive ones which i dont knwo the name of
 

gooner71

VIP Member
VIP Member
Joined
Mar 29, 2005
Messages
1,912
Reaction score
115
Thats reassuring to know I am on the right lines!! I will get a TnK bracket for it!! Thanks for the replies!!
 
TEST
Top