J
Junglist_DJ
Guest
Right first of all I would like to apologise for the nasty qulity of these pics, they were taken with a cheap webcam that I borrowed from work.
To get the full story of why I'm posting this have a look at this link
<a href="http://forumz.digital-worlds.com/ubb/ultimatebb.php?ubb=get_topic&f=20&t=000154" target="_blank">Other Thread</a>
Right here are a few pictures of my water cooled rig.
Bottom half of my case<br />
Close up of my Dander Den Maze 2 waterblock cooling my overcloked Athlon CPU<br />
Close up of Elsa Geforce 3 graphics card with Danger Den water block cooling the chipset.<br />
Close up of Danger Den chipset block cooling the Nortbridge chip on my IWill motherboard.<br />
15 pass Danger Den Cube Radiator that sits in the top of my case and cools the water down after it has left the water blocks<br />
Here's a pic of the side of my machine, that window took me 3 hours to cut with a dremel.<br />
Here are the specs of my machine for anyone that is interested.
AMD Athlon 1000 mhz CPU overclocked to 1425 mhz<br />Geforce 3 graphics card overclocked to 250/460 (need better ramsincs so I can OC the ram)<br />256 Meg of Mushkin REV 3 ram running at 150mhz cas 222<br />Iwill KK266r motherboard
[ 10 November 2001: Message edited by: Junglist_DJ ]</p>
To get the full story of why I'm posting this have a look at this link
<a href="http://forumz.digital-worlds.com/ubb/ultimatebb.php?ubb=get_topic&f=20&t=000154" target="_blank">Other Thread</a>
Right here are a few pictures of my water cooled rig.
Bottom half of my case<br />
Close up of my Dander Den Maze 2 waterblock cooling my overcloked Athlon CPU<br />
Close up of Elsa Geforce 3 graphics card with Danger Den water block cooling the chipset.<br />
Close up of Danger Den chipset block cooling the Nortbridge chip on my IWill motherboard.<br />
15 pass Danger Den Cube Radiator that sits in the top of my case and cools the water down after it has left the water blocks<br />
Here's a pic of the side of my machine, that window took me 3 hours to cut with a dremel.<br />
Here are the specs of my machine for anyone that is interested.
AMD Athlon 1000 mhz CPU overclocked to 1425 mhz<br />Geforce 3 graphics card overclocked to 250/460 (need better ramsincs so I can OC the ram)<br />256 Meg of Mushkin REV 3 ram running at 150mhz cas 222<br />Iwill KK266r motherboard
[ 10 November 2001: Message edited by: Junglist_DJ ]</p>