opening dbox2 screwdriver?

motsey

Inactive User
Joined
Oct 7, 2005
Messages
687
Reaction score
2
Location
Narnia
ok i got a silver nokia 2box 2 can take the screws off the back but the black ones on the side are being a pain what do i use or how do i open them?

-Thanks
 

notanotherone

VIP Member
VIP Member
Joined
Oct 4, 2005
Messages
2,400
Reaction score
49
Location
landofnevernever
security screw driver for the case screws - a torx set should get you in...available in most hardware shops.
 

cooltool

Inactive User
Joined
Oct 25, 2005
Messages
163
Reaction score
0
i got a set from maplins for a few quid it does the back panel screws ok but does not fit into the side ones (check for the side screws they are different size to the back panel screws.) .. u can use some pliers to turn them out .. but mostly u dont even need to open the box ..
 

motsey

Inactive User
Joined
Oct 7, 2005
Messages
687
Reaction score
2
Location
Narnia
ok thanks i might take the box with me and see if they have any

yea i have read about removeing the modem might cure a few problems
 

Dingodog

DW Member ++
Joined
Feb 21, 2005
Messages
1,513
Reaction score
13
Location
Notts/Derbys
I couldnt find a driver that would fit at Maplins, but a small jewlers driver did the trick, it doesnt fit prperly but u can do it.
 

loady

Inactive User
Joined
Jul 27, 2005
Messages
1,328
Reaction score
3
Location
Andromeda system
Maplins sell a "pros kit" it is a ratchet driver and lots of bits, all security and torx shit....the screws you are talking about are torx but they have a little nib in the centre which requires the torx bit to have a recess...the maplins kit has it and its only £10 and invaluable.
 

derekwd

Inactive User
Joined
May 21, 2005
Messages
927
Reaction score
2
Location
742 Evergreen Terrace
I just used a good quality small screwdriver and broke off the pin in the centre of the screw, now can use flat bladed to undo no prob.
 

Dingodog

DW Member ++
Joined
Feb 21, 2005
Messages
1,513
Reaction score
13
Location
Notts/Derbys
Just the way I did it, and then replaced them with phillips head type
 
TEST
Top