Openbox S9 froze

there is no jtag solution for these boxes just persevere with turning box off clicking connect and turning box on eventually it will connect and flash the image

edogg
 
hook a terminal program to the rs232 port,like xdown and you should see something in the xdown screen when you power up the receiver.Like app init ok.This shows the rs232 port is ok and can accept firmware.
 
Hi all,
i used upgrade tool 2.0.0c 2008-01-25 forst time with success, but after loaded firmware and reboot, now don't sync anymore.
if try with other tools say me "Set stb memory error"
 
sounds like you are loading the wrong firmware.
Use the 2.0.0c loader and try again.
Other tools were designed for good working receivers.
 
any1 help me

i have this problem also any help appreciated

i have an openbox s9 stuck on on

get stb memory error

for some reason my posts are being tripled

anyone ?????

im posting cuz i want to download

im posting cuz i want to download the files aboive

i want the files for my s9 box

i want the s9 box to work
 
Last edited by a moderator:
im using usb to rs232 could that be the problem?
 
sorry for multi posts, im trying to download the files u guys have kindly added
 
s10 on s9 the menus will be greyed out,unless the firmware states it is for s9/s10/s11/s12.
 
thanks for this - will give it a go - I'm having the same prob on an s11.
 
hieverybody,
i have got S9 and it was stock ON boot.
I tried different flash tools and always says "stb memory error".
Plese help me.

Thanks
 
Back
Top