Can get my dish to move via the positioner setup almost every time but it's quite intermittent whether or not it will move by selecting the channel. Have opened the box up and checked the tuner is fully inserted and reinserted and cleaned the contacts. The tuner is spot on once it's locked to the relevant sat and pulls down 15db from 28e. There is a green led on the tuner and that is on once the box is switched on. Also I can hear the motor click when i switch sats via channel selection but nothing happens.
Set up on diseq 1.2 using usals.
I set up my dm500 over the weekend and used it on the motor perfectly but since swapping back it has had a nervous breakdown, i have tried the 500 back on the motor and that seems to be fine pretty much ruling out the connections and the motor unless of course the voltage is different from the boxes and has upset the apple cart somewhat.
Confused
Set up on diseq 1.2 using usals.
I set up my dm500 over the weekend and used it on the motor perfectly but since swapping back it has had a nervous breakdown, i have tried the 500 back on the motor and that seems to be fine pretty much ruling out the connections and the motor unless of course the voltage is different from the boxes and has upset the apple cart somewhat.
Confused