TM5302 HD Rolling screen fixed with this upgrade
Download center
There are still problems with the Blind scan not completing the 1st phase of the Blind Scan (finding active transponder (reaches 50to 60% then shoots to 100% & does not search the last 50 to 75% of the set scan,)
Blind scan sometimes stops during the 2nd phase of the Blind Scan finding the tv channels or does not start this phase at all,
Some success was found with the Blind Scan by turning the receiver to standby after a blind scan but not able to fully overcome this fault with the current software,
YouTube works flawlessly probably the best I have seen YouTube work on a any device so well done on this,
Encrypted & UCAS channels work ok with the correct cards ect & open within 1 sec,
Biss Keys work ok provided you follow this procedure:
Remove all duplicate frequencies from the Biss menu,
Add new Biss Keys & channel data then to activate the keys switch the receiver to standby for 5 sec now view the channels,
With 2 or 3 Biss channels on the same frequency with different Biss keys you have to load in the frequency data +/- 3MHz so 11388=1st channel 11385=2nd channel 11391=3rd channel now scan each frequency to add to the channel list & add the correct Biss keys for each channel that you want to view making sure that it corresponds with the channel frequency,
The receiver only seems to be able to save some data after you switch the receiver to standby can this be corrected ?
Recording onto a USB device (Record, Edit, Delete, function works ok) No problems here,
DiSEqC Motor movement problems,
Sometimes the motor does not move to the next satellite selected (10 east to 28 east) so you have to move to the satellite next satellite to the one you are on & keep the ok button depressed for 3 to 5 sec until you see the display "Moving to" next satellite,
If the message does not appear then select another satellite from the menu to gradually get to the satellite that you want,
Summary:
Overall picture & audio are excellent & as good as any receiver costing 3 times what the TM5302HD retails at,
Blind Scan function need to be corrected to make it more stable as does the DiSEqC motor controls,
These functional problems of the TM5302 HD mentioned in this report need to be fixed on this receiver as any novice buying this receiver will have problems with the current software & as most customers just want to plug it in & view it is vital that these issues are addressed asap.
Only a few more things to fix after 33 software upgrades getting there but you do wonder if it would not have been better to have a senior Technician in Europe to test these receivers before they are released instead of relying on us enthusiasts :Mad2: