Smok3y666
Inactive User
- Joined
- May 24, 2007
- Messages
- 1,162
- Reaction score
- 16
I have a Phase 1000 1b box and have cut talkback and removed and replaced the jumper on the board to reset it. I didn't get a paired card with it so brought a P&P LED Simm and got the BK and IRD from that. I have tried setting NetID & PIN using Funcard 4 method but it will not reset when I put the Funcard in unless i'm not leaving it in long enough? The Sammy I have reset more or less straight away. I am using NetID V2 Final and putting my IRD in forwards starting with 12. Is that correct? I have also downloaded Libby but don't know which is the correct config file to load so that I can set my NetID that way. The only other thing I can think of is I have wrote the BK down wrong? I put the Simm in, flicked the switch to 1 and wrote down the binary code from left to right, then flicked the switch to 2 and wrote down the binary from left to right. I then converted it to HEX using the method in the tutorial.
Help appreciated. Thanks.
Help appreciated. Thanks.
Last edited:
