did u restart cam and make sure its on mgcamd 1.23?
Mgcamd 1.23 new out
- Thread starter JimmyP
- Start date
did u restart cam and make sure its on mgcamd 1.23?
yes m8....
sajon44
Inactive User
i'll give this a try over the weekend when i get five,nice one palm.....weirdo.
Jimmy i'll have ago at it again tomorrow she's wanting to watch tv, Thanks for all your help tonight again...
krazylegz
Inactive User
got this working in about 2mins max.......cheers jimmy
deleted all tps files in var/keys about 6 in all edited mg_cfg,restarted cam and went to france 4 and hey presto! picture came on in about 5 seconds
deleted all tps files in var/keys about 6 in all edited mg_cfg,restarted cam and went to france 4 and hey presto! picture came on in about 5 seconds
got this working in about 2mins max.......cheers jimmy
deleted all tps files in var/keys about 6 in all edited mg_cfg,restarted cam and went to france 4 and hey presto! picture came on in about 5 seconds
May you grow piles the size of apples and turn into a Sunderland supporter ya funna bassa lol
krazylegz
Inactive User
:roflmao: you can do it paul it's a doddle
I know m8 im missing something (a fooken brain), iv'e got a bit of a hangover but i'll get it done tomorrow...
My config is -
# EMM messages
# 00 don't show any EMM's (default)
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 01 }
# ECM messages
# 00 don't show any ECM's
# 01 show only valid ECM's (default)
# 02 show valid and bad ECM's with complete data display
C: { 01 }
# AU
# 01 enable AU
# 02 AU Auto
A: { 02 }
# key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 01 }
# network ecm timeout in seconds
K: { 10 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
O: { 00 }
# on screen display Options
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
S: { 03 }
# Log options
# 00 Off
# 01 Network
# 02 console
# 03 both
L: { 02 } 172.16.1.1 28007
# cache ecm pids and data used to open channels,
# store pids in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# use summ
# 00 Off (default)
# 01 Ecm pids cache
# 02 Ecm data cache
# 04 Emm cache for network cards
H: { 07 }
# reread files on zap:
# 00 No (default)
# 01 config (including priority and ignore, but not replace/cache)
# 02 config and keys
# 03 both
R: { 00 }
# debug, use summ
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 02 }
# keep ecm cache, seconds
E: { 15 }
# EMM messages
# 00 don't show any EMM's (default)
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 01 }
# ECM messages
# 00 don't show any ECM's
# 01 show only valid ECM's (default)
# 02 show valid and bad ECM's with complete data display
C: { 01 }
# AU
# 01 enable AU
# 02 AU Auto
A: { 02 }
# key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
N: { 01 }
# network ecm timeout in seconds
K: { 10 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd
# 02 newcamd, camd3, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
O: { 00 }
# on screen display Options
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
S: { 03 }
# Log options
# 00 Off
# 01 Network
# 02 console
# 03 both
L: { 02 } 172.16.1.1 28007
# cache ecm pids and data used to open channels,
# store pids in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# use summ
# 00 Off (default)
# 01 Ecm pids cache
# 02 Ecm data cache
# 04 Emm cache for network cards
H: { 07 }
# reread files on zap:
# 00 No (default)
# 01 config (including priority and ignore, but not replace/cache)
# 02 config and keys
# 03 both
R: { 00 }
# debug, use summ
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 02 }
# keep ecm cache, seconds
E: { 15 }
krazylegz
Inactive User
key update is wrong craig.
delete the following lines
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
and put in
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 04 }
so you end up with
# key update
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 04 }
delete every file in var/key thats got anything to do with tps. theres about 6 at the bottom.
ftp mg_cfg back to box and restart softcam then tps should clear
delete the following lines
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
and put in
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 04 }
so you end up with
# key update
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 04 }
delete every file in var/key thats got anything to do with tps. theres about 6 at the bottom.
ftp mg_cfg back to box and restart softcam then tps should clear
With JimmyP helping I got this fixed in next to no time. Unfortunatley I had to re-flash my Gemini image on my dreambox.
Anyway after rescanning , installing MGCamd 1.23 and then the MGCamd.cfg. I also transferred the files from this .zip folder into Var / Keys
This now has Premiere, D+, Cabo, TPS AU all working. D+ will probably need the new keys tomorrow night.
If you are stuck please try these files, just back-up your old ones if you like.
Anyway after rescanning , installing MGCamd 1.23 and then the MGCamd.cfg. I also transferred the files from this .zip folder into Var / Keys
This now has Premiere, D+, Cabo, TPS AU all working. D+ will probably need the new keys tomorrow night.
If you are stuck please try these files, just back-up your old ones if you like.
crazy
Member ++
Think i'm having a brain freeze recently, got sly but none of the other c/s packages. Can't for the life of me install 1.23 on the TM9100.
Think i'll have a beer instead!
Crazy
Think i'll have a beer instead!
Crazy
- Joined
- May 27, 2001
- Messages
- 20,896
- Reaction score
- 530
That cam pixalates for me, dropped back to old version.
krazylegz
Inactive User
the cam shouldnt just pixelate m8 especially since it works well on everyone elses. maybes your /var folder is too full so try deleting other cams and then try 1.23 or flash a maxvar image which frees up most space in the /var folder such as the new nabilosat image i posted last week
Similar threads
