LT + 3.0 Problems for Liteon DG-16D2S 74850C

[DBCar83]

Okay guys maybe you can help. I have a 74850C drive I am trying to flash for a friend here's a catch although I am not sure significant this one is A0A2 and not A0A1. I read from various outlets it doesn't matter. Anyways, I have the original dummy bin file before his drive died and now on this new drive it reads dvds and really old original 360 games but it goes back to dash when ran with a (ihasB) burnt and verified games. Although the newer original games it goes and sits a white Xbox logo screen. I never encountered these problems before after all these years of flashing and yes the ribbons were not attached when flashed and reattached properly when tested. I used the newest jungle-flasher and the iprep dos method as well, but to no avail. It has been updated to the newest dash and here is the following data to be used for your evaluations:

JungleFlasher 0.1.92 Beta (304)
Session Started Wed Dec 19 21:24:53 2012

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 5 windows drives A: C: D: E: G:
Found 2 CD/DVD drives D: E:

Loading firmware file C:\Users\WRCupZ\Desktop\Video Game Stuff\Conner\DummyConner.bin
MD5 hash: faa434cf983d726731adf009f237bc6b
Inquiry string found
Identify string found
Drive key @ Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:\Users\WRCupZ\Desktop\Video Game Stuff\JungleFlasher v0.1.92 Beta (304)\firmware\Firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

Target f/w saved as: Lite_CFW.bin
Drive is Lite-On..

Key found in KeyDB at record
Key is:
Key has been tested and verified, thanks C4eva !

Sending Lite-On-Erase request to port 0xA000
..............
Drive returned Status 0xD0
...
Serial flash found with Status 0x72
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0xA000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0xA000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0xA000
Drive is Lite-On..

Key found in KeyDB at record
Key is:
Key has been tested and verified, thanks C4eva !


Thanks for yal help, :Angryfire

-DBCar83-

 

[dont do it it"ll hurt]

you are using the wrong flash m80 i had this the other day
you will be using lt 3 but the wrong flash for the drive i would check it m80
should be LTPlus-0251-v3.0.bin lite on <<< might not be this one ( but think it is tbh ) but bin file is defo wrong
edit
sorry just read the log
you are trying to use that one download again and try it m80 but the flash file on the drive is defo 100 % wrong

 

[DBCar83]

you are using the wrong flash m80 i had this the other day
you will be using lt 3 but the wrong flash for the drive i would check it m80
should be LTPlus-0251-v3.0.bin lite on <<< might not be this one ( but think it is tbh ) but bin file is defo wrong
edit
sorry just read the log
you are trying to use that one download again and try it m80 but the flash file on the drive is defo 100 % wrong

umm sorry about this but what are you suggesting sir?

 

[dont do it it"ll hurt]

the modded firm ware is wrong
download a new one and give that a try if not good check the drive again
i had the same thing the other day used the right flash and works fine
edit
if above fails check you have the right drive and drive key

 

[schwrink3r]

Thanks, i've was looking for this, i had the same problem and didn't knew how to fix it

 

[bobby123]

here the bin you need and when flash is finished press outro/ATA reset