can some one tell us if it works ok or not ?
Flashed the 1x ide.img uploaded by biglew5k99
run the /sbin/init_hdd.sh script everything went smoothly
rebooted then in recording settings set
recording device= direct (file)
Then in "direct recording settings" set
recording directory= /hdd
max. file size (mb)=4096
write synchronous (O_sync)=on
write synchronous (fdatasync)=on
Left all all settings to default.
Recorded 2 hours continously also changed to a channel on the same transponder while recording.
played back pefectly no stutters or lip sync issue's.
It did get a bit hot in there was thinking of fitting a fan in there also
but then there might be a noise issue plus there is not much room left in there with the hdd inside.
So because the leads are long enough i might try to fit the hdd to a removable holder on the outside of the box to keep everything nice a cool.
Big thanks to Gurgel for all the hardwork time and effort he has put into this.
Thanks to pt-1 for letting us know about this project in the first place and his continued support.
Thanks to biglew5k99 for uploading the ide image and the easy to use script.
There are a couple of issue's i have
If you dont switch the hdd on at the mains and then power up the box it either hangs on loading kernel
or say after 5 minutes get passed this stage and boots up.
Then only way the box will boot up normaly is to switch both on then after the box has fully booted up switch the hdd of at the mains.
The other thing is if you are not using the hdd for recording
it does not seem to fall asleep after 5 minutes.
Apart from that it works spot on.:Clap: :Clap: