same problem. help enybody
Simply reflash a image, if your only problem is stuck on starting.
Just make sure you flash the correct image for the manufacture of your clone.
Tuner is Solo2 SE Lonrisun (2015) which is compatible with sunray images. Was V4 flashed and OpenATV 5.0. Now - no signal from LNB on any image (was reflashed from USB many times). LNB checked with other tuner - all good. On connector is 13V an 18V - all good. Think this is software problem, not hardware. Can reflash bootloader via hiperterminal, but can`t find bootloader for my Lonrisun. Help please.
P.S. First boot after any reflash - is incomplete (stopped on splash). Off and ON - reciever started, but no signal and don`t search chanels. Sorry for my english.
It is a well know issue the tuners been misssing on not scanning.
I may not be 100% correct but if you have flashed the v4 update onto that se it will no longer use sunray images.
There are some v4 images in our download section try one of those.
it was flashed but don`t start - Splash screen (HADES Powered by OpenVix), starting and all...
can`t download :-( but i have more than 5 messages. Can you upload it to another place? please.
ok. thank you, friendYou need to wait 24hrs after your 5th post for the forum to update your permissions.
same result - don`t start... were can i take bootloader for my Lonrisun Solo 2 SE (buy 2015 year, compatable vith Sunray images) to flash it via hyperterminal? may be it bad? on original images from VU (2013 year) it start well and AGC - 83% SNR - 0-99% (channels dont found). On Lonrisun images AGC and SNR - 0% HELP, PLEASE !
Ok i have found a clone bootloader for hyperterminal see attached there is update guide inside.
I can not test this so use at your own risk.
V4 update flashed good many times - no result. will try bootloader. thank you. My friend tell me to try FPGA update. What do you think?
We use essential cookies to make this site work, and optional cookies to enhance your experience.