Help setting up openbox as server

[bopper1968]

Hi guys
I am looking for some help to try and set up my own server.
I have some dreamboxes and some openboxes and I am struggling to set either up as a server.
I am logged into to no-ip.org and my listening ports are good.
If anyone can help me out that would be great.
Cheers
Bopper

 

[Rumpelstiltskin.]

Turn Openbox S9/S10 into a Server
How to make your OpenBox S9 HD or S10 HD satellite receiver into a server for use by clients for the purpose of sharing your own cards.

1. press menu
2. scroll down to Network Local Setting
3. press ok on remote
4.arrow right to Newcamd Server Settings
5. press ok on remote
6. enter newcamd server parameter
7 servversetting -ON-
8. TCP Port -eg. 13000- this MUST be forwarded in your router
9. Des Key 01020304055060708091011121314 Can be change to your own
10.add user in Newcamd server User manager with green button on remote
11. add username password allow emm yes
12. press yellow to save the configuration .

Now box is setup for server with 1 client and a reboot is always a good idea .

In the Client box with CCcam its the N: line to use for acces the server eg N: seerver_ip_or_dns Port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

 

[tony49]

In the Client box with CCcam its the N: line to use for acces the server eg N: seerver_ip_or_dns Port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
is the 256 only needed for cccam 2.13 and under ?

 

[Rumpelstiltskin.]

256 is a cheat used to show local cards when there are not any.

 

[nnn3000]

if you have an openbox that is currently a client, can you use this as a server too? would the original server be able to tell that this client is also a server?

thanks