Galaxis box???

Jarmy

Inactive User
Joined
Nov 8, 2005
Messages
4
Reaction score
0
I have heard of this from people at work, steer clear - it has not been recommended. I'll try and find out some more information
 

linked

Inactive User
Joined
Mar 21, 2005
Messages
752
Reaction score
10
Location
SOUTH WEST
Jarmy said:
I have heard of this from people at work, steer clear - it has not been recommended. I'll try and find out some more information
check your pm for some links to sites for support and stuff

http://xoomer.virgilio.it/geppotga/
http://www.gxmax.com/
http://www.zackyfiles.com/secciones/dekos/galaxis.htm
Bring in for a new firmware into a galaxy DVB galaxis-DVB-Receiver with the help of the hyperterminal

--------------------------------------------------------------------------------

This guidance for the setting-up of the hyperterminal and bringing in being files applies to the following receiver:

Galaxy IQg.MAX S
Galaxy IQg.Matrix S
Galaxy IQg.Matrix JSTV
Galaxy IQg.Matrix AC3 S
Galaxy IQg.Matrix S 1.3
Galaxy IQg.McZap S
Galaxy IQg.McZap S CI
Galaxy matrix Action S
Galaxy matrix C LiWest
Galaxy IQg.Broadband C
Galaxy Easy S CI 1.4
Galaxy Easy S CI
Galaxy Easy beta S CI
Galaxy Easy World S
Galaxy Easy T CI

and for

Primacom IQg.Broadband C
Schwaiger DigiZap S CI
Schwaiger DigiZap S
Deer man beta CI uvm.

With the galaxy - functions to receivern to the software - exchange over the serial interface starting from Bootloader - version 3.13 no longer. Thus it does not then even try, otherwise thereafter an attendance will be necessary with galaxy - service, so that your receiver functions again.

The hyperterminal should be present in each Windows installation, if not, it must over the Windows Setup is installed. One finds it under: Start > programs > accessories > hyperterminals or start > programs > accessories > communication.

With the first call attitudes for communication are queried (new connection).



1. One assigns a name, under which one finds these attitudes later again (e.g. as left on the Desktop).



2. One selects a free COM haven.



3. Communication characteristics define, attitude like here in the picture.



For terminating the hyperterminal asked, whether one would like to store the attitudes, does one this, can one these attitudes over the before assigned name again and again call.

Transfers one IS file

1. Hyperterminals with the evenly produced attitudes call.



2. Box and PC by zero-modem cables connect. The COM selected before use.



3. The key "D" to the PC keyboard keep pressed and the box on by remote maintenance or power switch switch.



If the boat load hereditary LOCK second is time indicated, no connection from the PC to the box exists, only from the box to the PC. Here one should examine the zero-modem cable and/or the installation/release of the COM in Windows.



In normal case the message appears:

Download mode!!!!
Waiting for down load using 1k XMODEM.

and "down" appears to the box on the display.



Now one selects over "file sends" one IS file out, which must fit the respective box. Is not if those AM suitable for the box, one can destroy the box thereby!!!



As minutes "1k XMODEM" must be selected.



After the actual Download to the box the box examines the check sums and does not take with correct check sum the file into the Flash memory - "pro6" at the display of the box during the Flashens of the memory one may not switch the box off, the memory could come in disorder and the box could afterwards no more start.

+++++++++++ POWER ON ++++++++++

=====================================================
FreeTV boat 2,50 September 25 2000 RKS 16:26:44
CCU: TMX320AV7111, Flash 4MB
Thank you for buying. galaxy development team
=====================================================

Download mode!!!!
Waiting for down load using 1k XMODEM
File check Sum 1bc
DRAM check Sum 1bc of OK ONE!!!

Start add=0x2c340000, end to add=0x2c35c2cb
Valid second gate. Please WAIT!!!
program ok!!!!
End to Download!!!?r > =====================================================
FreeTV boat 2,50 September 25 2000 RKS 16:26:44
CCU: TMX320AV7111, Flash 4MB
Thank you for buying. galaxy development team
=====================================================
...........
=====================================================
FreeTV boat 2,50 September 25 2000 RKS 16:26:44
CCU: TMX320AV7111, Flash 4MB
Thank you for buying. galaxy development team
=====================================================
...........0
=====================================================
BUILD: Dec 21 2001 15:24:53
VERSION: V0.01
MORE MANUFACTURER: GALAXY
=====================================================
DOWNLOAD
Manufacturer_id: 46545601
Hardware_id: 30
Usage_id: 2
SW_version: 69
TID: 431
BID: 1040
user_version: 30082000
channel_version: 3072000
=====================================================
================== HARDWARE CUNNING ===================
=====================================================
Flash of driver version: 1.00.00 17.07.2001
SW update version: FREETV 2.1.1 20/11/2000
Demodulator version: 1.003 15/06/2001
Scan version: 1.0.2 05/04/2001
-----------------------------------------------------------------------------
Dram_Size: 2
SDram_Size: 4
Flash1: AMD 29LV160B ID = 1, DEVICE ID = 2249
Flash2: AMD 29LV160B ID = 1, DEVICE ID = 2249
Eeprom_Typ: --------------------------------------------------------
Disp_Typ: Serial display
AVmux_Typ: STV 6410
Scart: three Scart
AC3_Typ: --------------------------------------------------------
RFmod_Typ: present
FE_Typ: Qpsk Samsung
Modem: --------------------------------------------------------
CIMax: present
=====================================================

After "end Download!!!" bootet the box again, and e.g. a Setting is immediately active and/or the new software starts. At some new software it can be that one some system attitudes again make must or that the own program list is lost, and one must again bring if necessary its Settings in.
 
TEST
Top