from cccam to oscam using ubuntu

[bobbyball]

im at work at minute so cant check it properly as not their to see channels are clearing or not, but i think it could be all systems working..

Will let you know when i get home
Thanks

 

[wiz569]

He is using oscam/CCcam D1GG3R m8 so all oscam should be doing is reading the cards,then passing this on to CCcam through the Nline,which then acts normally,sharing out as per the various flines,

So my thinking was that oscam needs to read both cards i.e. device0 and device1,which will be in separate groups 1,2

then the link between oscam and CCcam,the nline and corresponding oscam.user [account] will also be in group 1,2 so can access both cards,

It makes sense in my head but doesnt mean its correct lol

 

[D1GG3R]

He is using oscam/CCcam D1GG3R m8 so all oscam should be doing is reading the cards,then passing this on to CCcam through the Nline,which then acts normally,sharing out as per the various flines,

So my thinking was that oscam needs to read both cards i.e. device0 and device1,which will be in separate groups 1,2

then the link between oscam and CCcam,the nline and corresponding oscam.user [account] will also be in group 1,2 so can access both cards,

It makes sense in my head but doesnt mean its correct lol

we know oscam is working because the nline from the VU worked.

I think i read an earlier post that oscam was reading both readers entitlements.. so we know that works.

it has to be down to cccam????

 

[bobbyball]

i know what you mean wiz569 i keep getting it all sorted in my head but then i read something else and it all goes misty again
So in the end i will have only one oscam.user account
and i will give that one account access to all groups, if thats correct that also doesn't make sense as that means i could not limit different cards for different clients (with my setup) not that i would want to but im sure that would be the case.

 

[bobbyball]

we know oscam is working because the nline from the VU worked.

I think i read an earlier post that oscam was reading both readers entitlements.. so we know that works.

it has to be down to cccam????

From what i can make out working on this over the net at the minute, i appear to have an active client in cccam and i can see two sets of entitlements in oscam so unless i am very unlucky (usually am) it seems to be ok will let you know for sure when i get back..
Thanks again for taking to time to help..

 

[wiz569]

i know what you mean wiz569 i keep getting it all sorted in my head but then i read something else and it all goes misty again
So in the end i will have only one oscam.user account
and i will give that one account access to all groups, if thats correct that also doesn't make sense as that means i could not limit different cards for different clients (with my setup) not that i would want to but im sure that would be the case.

Thats because you are expecting oscam to work the way you are used to CCcam working,in this situation oscam is only reading the cards,its not doing anything regarding permissions etc,that will still be handled by CCcam

 

[bobbyball]

Hows about this for bad luck!!

Got home all buzzing about the fact i thought it was finally going to work, rebooted the server and nothing wont reboot..
So looks like either hdd is knackered or tower.

so im going to sit down now and have a few beers to drown my sorrows..

Will no doubt be back tomorrow with another machine to start again.
gutted!!!

 

[D1GG3R]

gutted mate....

don't give up.. have a few cold ones tonight.. try again tomorrow

 

[bobbyball]

Finally set up another server and still cannot get two cards working i can get two readers installed
i insert a card in one of the readers and it shows entitlements, if i take the card out and put it in the other reader it also works, but if i put two cards in it doesn't work
Below is a usb scan..



Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:02.1
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 0000:01:0a.2
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.0
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 OHCI Host Controller
iSerial 1 0000:01:0a.0
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 OHCI Host Controller
iSerial 1 0000:01:0a.1
Bus 003 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
iProduct 2 Smart Card Reader USB
iSerial 0
Bus 004 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
iProduct 2 Smart Card Reader USB
iSerial 0

 

[bobbyball]

Decided to format again and use debian 6 64bit, read earlier that is better for omnikey readers we shall see.....

 

[bobbyball]

Ok this is the latest news
Reformatted new hdd again only this time i installed debian 64.
Used exactly the same configs i was was using before which D1gg3r and wiz569 had been helping me with, booted it up bingo everything worked, both readers working and clearing channels...
Well pleased thanks for all your help
Must have been a dodgy install as i tried it several times before reloading software and just would not work on ubuntu setup..

Got a minor problem now went to bed 2.30 this morning after i finally finished tweaking server. all working fine very low ecms, this morning got up to go to work and picture was freezing pixelling on c**edy central hd and *** s**rts 2 ecms were quite high yet a few other clines were very low
Any ideas??
Thanks

 

[D1GG3R]

:Clap::Clap::Clap: glad you got it sorted mate...

not to sure about the new problem, but to be honest, i would have a read up on using oscam only!! you are 95% the way there

 

[CoolHandLuke]

Ok this is the latest news
Reformatted new hdd again only this time i installed debian 64.
Used exactly the same configs i was was using before which D1gg3r and wiz569 had been helping me with, booted it up bingo everything worked, both readers working and clearing channels...
Well pleased thanks for all your help
Must have been a dodgy install as i tried it several times before reloading software and just would not work on ubuntu setup..

Got a minor problem now went to bed 2.30 this morning after i finally finished tweaking server. all working fine very low ecms, this morning got up to go to work and picture was freezing pixelling on c**edy central hd and *** s**rts 2 ecms were quite high yet a few other clines were very low
Any ideas??
Thanks

That's where Cccam infophp come's in handy you might have a client that is abusing your card "Comedy Central" and "Sly Sports 2" are very common channel's you might have about 30 people watching them channel's at the same time.

Thing is with Cccam you really cant protect your card unless you use Cccaminfophp and look at the ecm rates etc, I ran a server as a hobby and soon got sick of dealing with dick head's hammering my card I had enough after a few week's.

I now just use oscam with no stranger's and I havent had to touch it for over 6 month.

Like wiz said in his post using Cccam with Oscam the Cccam takes all reshare right's away from oscam with Cccam it's impossible to protect your card. People just add your Cline in Oscam as a server ignore your re-share right's BINGO your card is now there's.

 

[digi247]

I completely agree with you on Oscam for a single card usage there is no better and run in conjunction with anticascading will sort out the idiots so to speak, The problem is if you exchange the card for european shares this is where oscam falls down as with CCcam tyou can control all reshare,Pids,Block Cards etc.. the list goes on with oscam you cant.


When the oscam team incorporate what cccam can do no one will need anything else.

 

[CoolHandLuke]

I completely agree with you on Oscam for a single card usage there is no better and run in conjunction with anticascading will sort out the idiots so to speak, The problem is if you exchange the card for european shares this is where oscam falls down as with CCcam tyou can control all reshare,Pids,Block Cards etc.. the list goes on with oscam you cant.


When the oscam team incorporate what cccam can do no one will need anything else.

That's true but you can make service list's, and you can always ask the person your sharing with to only give you what you want from there end, it is harder to get round and find good solid shares but I suppose probably worth the effort.

I found it hilarious when people used to say Ive got 20 hop 1 cards (so there using Oscam trick) Ive also got 310 hop 2 cards (that means really hop 3 and 190 of them are fake) and all there hop 3 cards are really hop 4 and glitchy anyway.

Pishhh off,,, if someone tells you the have more than 2 hop 1 cards, Id just laugh who pay's for more then one TV provider unless it a porn card a footy card and a normal TV like honest you get some right tw@ts. Boliva and Romanian etc are the worst for faking.

 

[digi247]

Precisely and thats why you should always check your shares weekly for those fakers pain in the backside LOL, the thing with CCcam as well is it will still be the Multi card choice even if your peers do not block cards out you can with CCcam as i said before the options are far greater than Oscam at this present time i mean you can even block just 1 channel on a card with CCcam. Thats probably why it is still used to this day.

 

[wiz569]

at this present time i mean you can even block just 1 channel on a card with CCcam. Thats probably why it is still used to this day.

You can do that in Oscam too,can't you?

 

[digi247]

You can do that in Oscam too,can't you?

You can block channel caid's coming in with oscam but as far as i am aware you cant do it outgoing like you can in CCcam for each individual peer, its more along the lines of you cant really control re-share outgoing with oscam as it over rides it.

 

[wiz569]

I have setup,as a favour, a line with access to only one specific channel using the services option, or is that not what we are talking about here?

Sent from my Xperia X10 using Tapatalk 2

 

[digi247]

I have setup,as a favour, a line with access to only one specific channel using the services option, or is that not what we are talking about here?

Sent from my Xperia X10 using Tapatalk 2

Yes thats precisely what i was talking about but i was not aware it could be used for other shares put in as readers in oscam, if you can do it with that as well as block re-share back out then its good to go.