glic83
Inactive User
im struggling to get my 1m motorised dish set up im currently using the eagle image,was just wondering if there is a fool proof image or what is the simplist/straight forward image to use?
fool proof image
- Thread starter glic83
- Start date
logic_187
Inactive User
what you trying to do? they are all about the same........
glic83
Inactive User
its not sending the dish to the right place i tried to send it to 1w and it went miles to far then it wouldnt send it to 19e so im going to try a different image to see if that helps
glic83
Inactive User
im using a 1m dish,a dm 500s (clone) and a technomate diseqc H-H motor tm 2200 super
and currently have the eagle image on it
and currently have the eagle image on it
telewestTUM
Inactive User
use the Pli-Image its much better i have Eagle Box and thats what ive used for over 6 months now
there website has it there DM500S image
reset the motor using the instructions in the manual and then once the motors at 0 setup either usals or the other one which i forget the name
and it should start finding them 1 by 1
the way i found worked for mine was send it to 1w using the defualt location in the motor and then peak the signal moving the dish up and down left and right til its the best its going to get
then go from satelitte to satelitte using captain picards bouquet (can be downloaded via blue button in pli image)
there website has it there DM500S image
reset the motor using the instructions in the manual and then once the motors at 0 setup either usals or the other one which i forget the name
and it should start finding them 1 by 1
the way i found worked for mine was send it to 1w using the defualt location in the motor and then peak the signal moving the dish up and down left and right til its the best its going to get
then go from satelitte to satelitte using captain picards bouquet (can be downloaded via blue button in pli image)
