flash log help

[diggles]

Hi All.I am having problems trying to flash my sagem.
this is my latest flash log

þdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
------ Systeminformations ------
Selected networkdevice: SiS190 100/10 Ethernet Device (0)
IP-address of the networkdevice: 192.168.0.201
IP-address which the dbox gets: 192.168.0.202
Operatingsystem: Professional (Build 6000)
------ Powered by http://www.dboxservice-hallenberg.de ------

Any advice apreciated

 

[Fergalsworld]

boot: elfcopy failed: 16
Something is blocking the network firewall,antivirus,another networkcard,etc
disable all off them and set your networkcard to 10baseT_halfduplex and try again.

 

[diggles]

Thanks for your help,still getting ,elfcopy failed :16
I will try to completely uninstall anti virus and other network card and see if this helps
Also,I should have said ,I am running vista,would this change things?

 

[Fergalsworld]

Thanks for your help,still getting ,elfcopy failed :16
I will try to completely uninstall anti virus and other network card and see if this helps
Also,I should have said ,I am running vista,would this change things?

Ahhh vista
Go here and get the latest version of ifa unistall the others
h**p://www.dboxservice-hallenberg.de/freedownloads.php
Then go to Control panel > Network Panel > Network and Sharing Center > Manage Network Connections
protocol version 6 & 4
disable IPV6 and enable ipv4 and also make sure that IPV4 has been given an inbuilt IP address one below the boxes ip.
Try that.

 

[diggles]

Thanks, I will try out tomorrow and let you know how I get on