[DOWNLOAD] Panasonic PBX Unified Maintenance Console UPCMCv7.8.1.1_R17

millerlyte

Inactive User
Joined
Aug 22, 2018
Messages
3
Reaction score
0
I need to program with the US version of the console. I"m glad I found this forum.
 

orthographic

Inactive User
Joined
Oct 6, 2018
Messages
1
Reaction score
0
I have the following issue when connecting to the PBX console: UB2000B: The maintenance console software cannot connect to the pbx because of the software that van maintain the KX-NCP500/1000 version is not installed to this pc...
Is the software with multi region support?
 

jja776

Inactive User
Joined
Oct 13, 2018
Messages
2
Reaction score
6
I just picked up a TDE-200 from an auction. Once I get to 5 posts, I will use this to try and administer the thing! I haven't been able to find the software anywhere else.
 

jja776

Inactive User
Joined
Oct 13, 2018
Messages
2
Reaction score
6
I hoped that the uploader and the site admins would find my praise to be meaningful! Oh well. Neither this nor my previous post need count against my 5.
 

turner brown

VIP Member
VIP Member
Joined
Oct 24, 2010
Messages
3,448
Reaction score
1,248
I hoped that the uploader and the site admins would find my praise to be meaningful! Oh well. Neither this nor my previous post need count against my 5.
your a paid member you should be able to dl once account sorted
 

kemog

Inactive User
Joined
Oct 29, 2018
Messages
3
Reaction score
1
Hello!
As I understood this software covers support for Panasonic PBX "KX-TDA15".
Anyone knows how many expansion cards it can support?
We have one (and only) in our office (office consisting of 8 desks with digital lines for talk and analogue for faxes) and we need to add more extensions to it for new officers.
 

riggs429

New Member
Joined
Aug 15, 2019
Messages
1
Reaction score
1
I am trying to get the Maintenance Console for the Panasonic KX-TDE100 to work but seem to be having issues.

What is the correct version?

I had downloaded UPCMCV7.8.11 R14 but during the install it asked me for a suffix which I was unable to locate. Were would I find the suffix?

I tried selecting "C" as the suffix, since I noticed the interface cards ended in C. The application installed but when I try to access the maintenance console, I get a error saying the program was not installed correctly. Is this due to the region or suffix question in the install phase?

I have uninstalled the R14 software of the Maintenance console and have now installed UPCMCv7.8.1.1_R17 but it also is asking for a suffix.
The web interface appears to work as it is giving me the extensions and the date/time info but no info as to the co lines, etc.

I have also downloaded UPCMCv7.8.2.0_US_R1 and gave it a try. It appears to be a USA version but the Maintenance console portion comes back as no application installed. The web interface appears to work but it is limited as only providing extension names again. This is frustrating.
Will the USA version claimed to be listed here actually work?

Can no one help me with the USA version of this software? How many posts must I make here? Is this another bait and switch website? Let me guess, you decide to pay and they send you a download of the same crap available all over the web.
 

ButlerInfoSys

New Member +
Joined
Nov 16, 2019
Messages
7
Reaction score
1
I had the same problem. Using a KX-TDA50 with no suffix. Flipped the unit over, and no suffix in the model number listed on the little sticker either.
 
Joined
Dec 20, 2019
Messages
1
Reaction score
0
I am getting an error E000012 The program is not installed correctly when trying to connect to a TDA200 US version.
 

gassdoc

New Member
Joined
Jan 8, 2020
Messages
6
Reaction score
0
I am trying to get the Maintenance Console for the Panasonic KX-TDE100 to work but seem to be having issues.

What is the correct version?

I had downloaded UPCMCV7.8.11 R14 but during the install it asked me for a suffix which I was unable to locate. Were would I find the suffix?

I tried selecting "C" as the suffix, since I noticed the interface cards ended in C. The application installed but when I try to access the maintenance console, I get a error saying the program was not installed correctly. Is this due to the region or suffix question in the install phase?

I have uninstalled the R14 software of the Maintenance console and have now installed UPCMCv7.8.1.1_R17 but it also is asking for a suffix.
The web interface appears to work as it is giving me the extensions and the date/time info but no info as to the co lines, etc.

I have also downloaded UPCMCv7.8.2.0_US_R1 and gave it a try. It appears to be a USA version but the Maintenance console portion comes back as no application installed. The web interface appears to work but it is limited as only providing extension names again. This is frustrating.
Will the USA version claimed to be listed here actually work?

Can no one help me with the USA version of this software? How many posts must I make here? Is this another bait and switch website? Let me guess, you decide to pay and they send you a download of the same crap available all over the web.
Did you get it figured out?
 

Wanetelecoms

New Member
Joined
Jan 18, 2020
Messages
1
Reaction score
1
The USA Version of the Maintenance console does not ask for suffix codes during installation. USA systems there for i believe do not have suffix codes, atleast for the ones i have remotely supported. @ riggs429, the suffix is on a white sticker at the bottom or back of the cabinet. You may see something like KX-TDE100BX, KX-TDE100CN, KX-TDE100NE etc depending on your locaion. The lastest version of the console (Both USA and Global version ) is 7.8.2.0 as far as i know.
 

RLComputers

Premium Member
Premium Member
Joined
Aug 21, 2020
Messages
3
Reaction score
0
So I'm new here and found this while trying to get software for a couple of TDA50G systems I need to install for customers. I have installed a dozen or so of Panasonic systems from back in the white box days, and now a couple of the customers are interested in upgrading from their 12 year old boxes while keeping the phones they already own. I had 3rd party software to program 616 and 1224 systems, but I am looking for the actual Panasonic software. From my reading in this thread it appears the R17 may not support the 50 series. Is that correct? I have found a listing on Amazon for $195 with screen shots that list the 50 as one of the system options. Any help would be appreciated.
 

luisoblanco

Premium Member
Premium Member
Joined
Sep 26, 2020
Messages
6
Reaction score
1
Where can I find the US version for Panasonic KX-TDA50 console programming?
 

RLComputers

Premium Member
Premium Member
Joined
Aug 21, 2020
Messages
3
Reaction score
0
So I'm new here and found this while trying to get software for a couple of TDA50G systems I need to install for customers. I have installed a dozen or so of Panasonic systems from back in the white box days, and now a couple of the customers are interested in upgrading from their 12 year old boxes while keeping the phones they already own. I had 3rd party software to program 616 and 1224 systems, but I am looking for the actual Panasonic software. From my reading in this thread it appears the R17 may not support the 50 series. Is that correct? I have found a listing on Amazon for $195 with screen shots that list the 50 as one of the system options. Any help would be appreciated.
I'm in the same boat here. There doesn't seem to be current experts following this anymore. I did find one company that would supply software and drivers for the 50G if I bought it from them. They then quoted me $567 for a base 50G which I can get most everywhere else for $375 to $450.
 

abdulnetwiz

New Member
Joined
Oct 19, 2020
Messages
3
Reaction score
0
I'm new to the forum and I have been trying to find the download button but couldn't.
 

abdulnetwiz

New Member
Joined
Oct 19, 2020
Messages
3
Reaction score
0
I'm new to Panasonic, can someone please help me on how to configure the PRI30 on KX-TDA100
 

RLComputers

Premium Member
Premium Member
Joined
Aug 21, 2020
Messages
3
Reaction score
0
TEST
Top