At the races problem

[installer]

I have a dm500 clone, and a tm500 the tm500 displays at the races perfectly, but the 500 wont, bypressing the green button, (pli image) i can get it to show a pic, but its like a stream from the track not the actual channel, anyone have a fix for this?

 

[Ten Below]

I think you are trying to view the interactive channel, there are 2 verions of this channel showing in 28e

 

[installer]

i cant seem to view it on my dm500 clone :--(

 

[MFCGMFC]

its a known problem with the dm500s mate

doesnt seem to be a fix

Cheers
MFCGAVMFC

 

[Ten Below]

The screen shots above are taken from my own dm500 using openpli image, Use dreambox edit to change the following pid values for the channel

Satellite Position: 28,2
Transponder: 2052
Frequency: 10876000
Vertical
FEC 5/6
Other Parameters :2:0

Video Pid: 518
Audio: 646
Teletext: 582
PCR: 8190

Extra Parameters: C:0960,C:0961,C:0963

Enter these with dreambox edit then do a hard reset (pull the plug out the back then put it back in) to get the changes to register in the lamedb.If you are changing it with out the reboot it won't work, or register the changes that you are making.

Hope this helps you.

 

[installer]

tried to do that but dont know my way around dbedit too well. maybe try again later, thanks m8. think i have a different frequency to what you have also.