Set it to 1080p.
i have same
Set it to 1080p.
the rest of the flash is taken up by systems files
i have same
putty log shows
resolution: 1280 x 720
when it should show 1920 x1080
as infobar in pic shows
Doesn't matter why to be honest.
Has nothing to do with the firmware ware issues.
All variants of these clones are 1:1 copies spec wise.
The difference will be in the bios/bootloader code... or the tpm.
nothing else i would imagine.
In the screenshot it's set to 1080i?
@omni
Need to dump the nand.. off the new box and see if it goes on the older ones ,
Can the nand be dumped over putty ?
new STB vu solo 2, 1GB DDR,3D RAM, 1300 MHz MIPS processor ,BCM3445KMLGP11main chip,
Different BCM to mine.my clone has BCM7356ZZKFEB3G
would that be the difference...
davvvo, your drivers are :
15.02.2014 22:17 5'260 brcmfb.ko
15.02.2014 22:18 12'979'232 dvb-bcm7356.ko
15.02.2014 22:18 2'352 fpga_directc.ko
15.02.2014 22:18 4'088 procmk.ko
24.12.2013 are :
24.12.2013 07:11 5'412 brcmfb.ko
24.12.2013 07:12 12'992'683 dvb-bcm7356.ko
24.12.2013 07:12 2'512 fpga_directc.ko
24.12.2013 07:11 4'243 procmk.ko
The ones of the 12.12.2013
12.12.2013 02:35 5'412 brcmfb.ko
12.12.2013 08:39 12'992'614 dvb-bcm7356.ko
12.12.2013 02:35 2'512 fpga_directc.ko
12.12.2013 02:35 4'243 procmk.ko
06.11.2013 :
23.10.2013 03:38 5'412 brcmfb.ko
06.11.2013 07:56 12'424'001 dvb-bcm7356.ko
23.10.2013 03:39 105'992 fpga_directc.ko
23.10.2013 03:38 4'243 procmk.ko
23.10.2013 are :
23.10.2013 03:38 5'412 brcmfb.ko
23.10.2013 09:09 12'428'185 dvb-bcm7356.ko
23.10.2013 03:39 105'992 fpga_directc.ko
23.10.2013 03:38 4'243 procmk.ko
So looks like patched or new drivers, as no released drivers on the past 2 years for VU+ Solo2 are same lengh to your files.
Omni
We use essential cookies to make this site work, and optional cookies to enhance your experience.