pixl
Inactive User
Seem there was some posts about editing your pids etc. over your home network. I can't find the software download or even posts about using it.
OpenBox Over the Network Editor
- Thread starter pixl
- Start date
slugworth
Inactive User
stbhd lan manager, s10 firmware after may 5,2011 had support for it.
Not true ftp so you can't connect with a browser or real ftp programs.
I use it to load firmware to receiver,saves wear and tear on the usb connector and is faster than rs232,unless I am experimenting.
Not true ftp so you can't connect with a browser or real ftp programs.
I use it to load firmware to receiver,saves wear and tear on the usb connector and is faster than rs232,unless I am experimenting.
SharingBox
Inactive User
- Joined
- Mar 24, 2012
- Messages
- 1
- Reaction score
- 0
pixl
Inactive User
Got it, thanks guys.
Now I'll have to figure out how to use it.
Now I'll have to figure out how to use it.
slugworth
Inactive User
there is a flaw in the full dump from receiver function,if you do a full dump to usb stick it is not the same as a full dump via lan manager.The work around is to also take a tps_prog.dbs dump via lan and use that as needed.
pixl
Inactive User
Arthur,
I got the LAN software working today and did a few channel edits. Works good. But I'm not sure about your post about the full dump. Is one not as good as the other? LAN or usb stick?
edogg
Inactive User
- Joined
- Feb 24, 2006
- Messages
- 4,055
- Reaction score
- 723
when you select dump by usb and then image file a drop down menu should appear where you can select what is included in the dump CCcam.cfg : Tp_prog.abs : CCcam.prio ect you just need to select what you want in the dump
edogg
slugworth
Inactive User
very true,I select everything and save.
The download via lan has no options like that and a bug prevents the full ball of wax to be saved.
Do a full dump to usb and the same via lan manager and compare both files with a hex editor.
The sat info will be missing.I found that while searching for the area where the 6666 to activate network tab function is stored.
The download via lan has no options like that and a bug prevents the full ball of wax to be saved.
Do a full dump to usb and the same via lan manager and compare both files with a hex editor.
The sat info will be missing.I found that while searching for the area where the 6666 to activate network tab function is stored.
Similar threads
