Hi Guys,
I have been messing around for a few days now with my DM800se and at the start I had an image from the forum by Alimac running which was pretty sweet, it had tsMedia and pluginmover, bouquets all sorted etc but I cant seem to get that as an example to load again. I think the image I used was from the clone section and thats maybe why none of the streams would actually load a picture in tsMedia, I did use pluginmover to clear up some space in working memory and move all the skins etc to a usb mount.
The problem I have is that now I can only flash an openpli image that is just a baseline and doesnt have anything configured, i got it just from openpli wiki.
if i telnet to my dreambox and run opkg list | grep secondstage then it tells me :
dreambox-secondstage-dm800se - 84-r20.2
and if i look in about menu on dreambox it tells me :
Image : openpli 4
kernel : 3.2
Enigma : 2015-02-16
GStreamer : 0.10.36 (git)
python version : 2.7.3
Most of the images I have tried to flash using the browser just give me the R01: no ca found error on reboot and to resolve that I am using dreamup 1339 with COM connection to get my standard OpenPLi-4.0-beta-dm800se-20150217.nfi back on the dreambox, when i do this it will reboot and load fine, its just obviously nothing is configured
So my question is if i want to have an image that has the awesome preconfigured stuff like https://www.digitalworldz.co.uk/index.php?resources/2933/ what bootloader and image combo would be good for a DM800se and what tool do i have to use to get the bootloader to change, at the moment I have just been running dreamup 1339 every time i was getting the no ca found error on reboot
I think if i knew the right combination of bootloader and image and knew how to get the bootloader applied then i would be flying, any help would be most appreciated!
I have been messing around for a few days now with my DM800se and at the start I had an image from the forum by Alimac running which was pretty sweet, it had tsMedia and pluginmover, bouquets all sorted etc but I cant seem to get that as an example to load again. I think the image I used was from the clone section and thats maybe why none of the streams would actually load a picture in tsMedia, I did use pluginmover to clear up some space in working memory and move all the skins etc to a usb mount.
The problem I have is that now I can only flash an openpli image that is just a baseline and doesnt have anything configured, i got it just from openpli wiki.
if i telnet to my dreambox and run opkg list | grep secondstage then it tells me :
dreambox-secondstage-dm800se - 84-r20.2
and if i look in about menu on dreambox it tells me :
Image : openpli 4
kernel : 3.2
Enigma : 2015-02-16
GStreamer : 0.10.36 (git)
python version : 2.7.3
Most of the images I have tried to flash using the browser just give me the R01: no ca found error on reboot and to resolve that I am using dreamup 1339 with COM connection to get my standard OpenPLi-4.0-beta-dm800se-20150217.nfi back on the dreambox, when i do this it will reboot and load fine, its just obviously nothing is configured
So my question is if i want to have an image that has the awesome preconfigured stuff like https://www.digitalworldz.co.uk/index.php?resources/2933/ what bootloader and image combo would be good for a DM800se and what tool do i have to use to get the bootloader to change, at the moment I have just been running dreamup 1339 every time i was getting the no ca found error on reboot
I think if i knew the right combination of bootloader and image and knew how to get the bootloader applied then i would be flying, any help would be most appreciated!
Last edited by a moderator: